Evaluation of Occupational Health Hazards among Oil Industry Workers: A Case Study of Refinery Workers

Оценка профессиональных факторов риска для здоровья работников нефтяной промышленности: пример работников нефтеперерабатывающего завода
Harcourt, Choba, Rivers State, Nigeria, Faith Eyayo
2014-01-01

environmental monitoringhazard risk assessment matrixoccupational health hazardsoccupational health practicesoil refinery workers
Occupational Health Hazard which is different from Occupational Safety Hazard is prevalently on the rise as industrialization increases in the global world.And identifying them in order to prevent and control them is very imperative to the health and well-being of the workers.The health and well-being of the workforce of a Company which is their most valuable asset should not be toyed with by the Management.Health Hazards which could result in the development of diseases and sicknesses is categorized into Physical Health Hazard, Chemical Health Hazard, Biological Health Hazard, Mechanical/Ergonomic Health Hazard and Psychosocial Health Hazard.These Health Hazards, usually, could be associated with most industrialized Organization and the Oil and Gas Refinery is not left out.Furthermore, in the course of this study, data was collected through open-ended Questionnaires to the workers and the Occupational Health Doctor.Also, Environmental Monitoring/Surveillance was carried out in seven main units of the Refinery.The questionnaire was administered to the workers randomly and was used to identify the Health Hazards, determine the awareness of the workers of the Health Hazards and evaluate the Occupational Health Practice that exists in the Refinery.Environmental Monitoring/Surveillance which includes the use of specialized equipments and good housekeeping were used to identify the different Health Hazards, and also, to assess the risk associated with the Health Hazards identified.Hazard Risk Assessment Matrix was used to identify the Health Hazards and the risks associated with them.A total of 85 respondents participated in the study.Most of the respondents were in the age range of 31-40 years and approximately 31% run Shift Duty.Majority of respondents (82.4%) were males, married (64.7%) and had completed tertiary education (81.2%) respectively.Majority of respondents were able to identify the Health Hazards: Physical Health Hazard (74.2%);Chemical Health Hazard (70.9%);Mechanical/Ergonomics Health Hazard (78.8%) but the level of awareness of Psychosocial Health Hazard (48.3%) and Biological Health Hazards (9.6%) were low especially that of the latter.For the evaluation of Occupational Health Practice most of the respondent (78.1%) agreed that management is committed to the health and well-being of their workers.With the Environmental Monitoring, it was deduced that the above named first three Health Hazards and the Biological Health Hazard are prevalent in the Refinery.With the Hazards Risk Assessment Matrix, the level of risk these identified Health Hazards pose on the workers was 3D, 5E, 3C and 0A respectively However, workers' susceptibility to work related-diseases depends on a lot of factors, and it usually takes some time before the manifestation of the illnesses and diseases on the worker could be diagnosed.Consequently, Health Effect Management Process which is an element in Occupational Health and Safety Management System (OHS-MS) amongst others is recommended management protocol that would assist the management of an Oil and Gas Refinery protect, promote and rehabilitate the health and well-being of their workers. II. Literature Review Overview of the Petroleum IndustryThe petroleum industry began with the successful drilling of the first commercial oil well in 1859, and the opening of the first refinery two years later to process the crude into kerosene.The evolution of petroleum refining from simple distillation to today's sophisticated processes has created a need for health and safety management procedures and safe work practices.To those unfamiliar with the industry, petroleum refineries may appear to be complex and confusing places.Refining is the processing of one complex mixture of hydrocarbons into a number of other complex mixtures of hydrocarbons.The safe and orderly processing of crude oil into flammable gases and liquids at high temperatures and pressures using vessels, equipment, and piping subjected to stress and corrosion requires considerable knowledge, control, and expertise.Safety and health professionals, working with process, chemical, instrumentation, and metallurgical engineers, assure that potential physical, mechanical, chemical, and health hazards are recognized and provisions are made for safe operating practices and appropriate protective measures.These measures may include hard hats, safety glasses and goggles, safety shoes, hearing protection, respiratory protection, and protective clothing such as fire resistant clothing where required.In addition, procedures should be established to assure compliance with applicable regulations and standards such as hazard communications, confined space entry, and process safety management.Petroleum refining has evolved continuously in response to changing consumer demand for better and different products.The original requirement was to produce kerosene as a cheaper and better source of light than whale oil.The development of the internal combustion engine led to the production of gasoline and diesel fuels.The evolution of the airplane created a need first for high-octane aviation gasoline and then for jet fuel, a sophisticated form of the original product, kerosene.Present-day refineries produce a variety of products including many required as feedstock for the petrochemical industry.Distillation Processes.The first refinery, opened in 1861, produced kerosene by simple atmospheric distillation.Its by-products included tar and naphtha.It was soon discovered that high-quality lubricating oils could be produced by distilling petroleum under vacuum.However, for the next 30 years kerosene was the product consumers wanted.Two significant events changed this situation: (1) invention of the electric light decreased the demand for kerosene, and (2) invention of the internal combustion engine created a demand for diesel fuel and gasoline (naphtha).Thermal Cracking Processes.With the advent of mass production and World War I, the number of gasoline-powered vehicles increased dramatically and the demand for gasoline grew accordingly.However, distillation processes produced only a certain amount of gasoline from crude oil.In 1913, the thermal cracking process was developed, which subjected heavy fuels to both pressure and intense heat, physically breaking the large molecules into smaller ones to produce additional gasoline and distillate fuels.Visbreaking, another form of thermal cracking, was developed in the late 1930's to produce more desirable and valuable products.Catalytic Processes.Higher-compression gasoline engines required higher-octane gasoline with better antiknock characteristics.The introduction of catalytic cracking and polymerization processes in the mid-to late 1930's met the demand by providing improved gasoline yields and higher octane numbers.Alkylation, another catalytic process developed in the early 1940's, produced more high-octane aviation gasoline and petrochemical feedstock for explosives and synthetic rubber.Subsequently, catalytic isomerization was developed to convert hydrocarbons to produce increased quantities of alkylation feedstock.Improved catalysts and process methods such as hydrocracking and reforming were developed throughout the 1960's to increase gasoline yields and improve antiknock characteristics.These catalytic processes also produced hydrocarbon molecules with a double bond (alkenes) and formed the basis of the modern petrochemical industry.Treatment Processes.Throughout the history of refining, various treatment methods have been used to remove nonhydrocarbons, impurities, and other constituents that adversely affect the properties of finished products or reduce the efficiency of the conversion processes.Treating can involve chemical reaction and/or physical separation.Typical examples of treating are chemical sweetening, acid treating, clay contacting, caustic washing, hydrotreating, drying, solvent extraction, and solvent dewaxing.Sweetening compounds and acids desulfurize crude oil before processing and treat products during and after processing.Following the Second World War, various reforming processes improved gasoline quality and yield and produced higher-quality products.Some of these involved the use of catalysts and/or hydrogen to change molecules and remove sulfur.A number of the more commonly used treating and reforming processes are described in this chapter of the manuals Overview of Occupational HealthOccupational health is a means of protecting and maintaining the physical, psychological and social health of workers and their families.It can also be viewed as the study of factors or conditions influencing the
1
Data were collected from 85 workers and an occupational health doctor using open-ended questionnaires, environmental monitoring, surveillance, and a hazard risk assessment matrix.
2
Environmental monitoring was conducted across seven main refinery units to identify hazards and assess their associated risks.
3
Most respondents recognized occupational health hazards, including physical hazards (74.2%) and chemical hazards (70%); approximately 31% worked shift duty.
4
The study evaluates occupational health hazards among refinery workers across physical, chemical, biological, ergonomic, mechanical, and psychosocial categories.
5
The workforce was predominantly male (82.4%), married (64.7%), and tertiary-educated (81.2%), providing demographic context for refinery hazard awareness and practices.

refinery workers and their occupational environment in an oil and gas refinery

occupational health hazards, workers’ awareness of them, and related occupational health practices and risks

Publication Details
Publication Date
2014-01-01
Journal
Publisher
ISSN
Cited by
42
Access Type
Author Information
Authors
Harcourt, Choba, Rivers State, Nigeria
Faith Eyayo
Explore further
Open the scid.ai AI chat with a ready-made request: it will find papers on a similar topic and help build a literature review.
Find similar papers in the chat →
Make a presentation
100%