Powder metallurgy of titanium – past, present, and future
Порошковая металлургия титана — прошлое, настоящее и будущее
2017-08-28
SCID: 54.1/2zznqhby
Discuss with AI
Ti-6Al-4Vfatigue propertieshydrogen-assisted magnesium reductionmicrostructural engineeringtitanium powder metallurgy
Figures from the paper
Abstract (AI)
Powder metallurgy (PM) of titanium is a potentially cost-effective alternative to conventional wrought titanium. This article examines both traditional and emerging technologies, including the production of powder, and the sintering, microstructure, and mechanical properties of PM Ti. The production methods of powder are classified into two categories: (1) powder that is produced as the product of extractive metallurgy processes, and (2) powder that is made from Ti sponge, ingot, mill products, or scrap. A new hydrogen-assisted magnesium reduction (HAMR) process is also discussed. The mechanical properties of Ti-6Al-4V produced using various PM processes are analyzed based on their dependence on unique microstructural features, oxygen content, porosity, and grain size. In particular, the fatigue properties of PM Ti-6Al-4V are examined as functions of microstructure. A hydrogen-enabled approach for microstructural engineering that can be used to produce PM Ti with wrought-like microstructure and properties is also presented.Abbreviations: AM: additive manufacturing; ARC: Albany Research Center; BE: blended elemental; BUS: broken-up structure; CCGA: close-coupled gas atomisation; CHIP: CIP-sinter-HIP; CIP: cold isostatic pressing; CP-Ti: commercially pure Ti; DRTS: direct reduction of Ti-slag; CSIR: Council for Scientific and Industrial Research (South Africa); CSIRO: Commonwealth Scientific and Industrial Research Organization (Australia); EIGA: electrode induction gas atomisation; EMR: electronically mediated reduction; FFC: Fray, Farthing, and Chen; GA: gas atomisation; GIF: gaseous isostatic forging; GSD: granulation-sintering-deoxygenation; HAMR: hydrogen-assisted magnesium reduction; HDH: hydride–dehydride; HIP: hot isostatic pressing; HSPT: hydrogen sintering and phase transformation; MA: master alloy; MER: Materials & Electrochemical Research Corporation (US); MHR: metal hydride reduction; MIM: metal injection molding; OM: optical microscope; OS: Ono and Suzuki; PA: pre-alloyed; P/C: performance to cost ratio; PIF: pneumatic isostatic forging; PM: powder metallurgy; PREP: plasma rotating electrode process; PP: post-processing; PS: press and sinter; QIT: Quebec Iron & Titane, Inc. (Canada); SEM: scanning electron microscope; SPS: spark plasma sintering; SOM: solid oxide membrane; THP: thermohydrogen processing; TMP: thermomechanical processing; UFG: ultrafine grain; UGS: upgraded titanium slag; UTS: ultimate tensile strength; USTB: University of Science and Technology Beijing (China); VA: vacuum atomisation; VHP: vacuum hot pressing; WP: wrought process; YS: yield strength
Key Findings
1
Hydrogen-assisted magnesium reduction and hydrogen-enabled microstructural engineering are highlighted as approaches for producing PM titanium with wrought-like microstructures and properties.
2
Mechanical properties of PM Ti-6Al-4V depend strongly on microstructural features, oxygen content, porosity, and grain size; fatigue performance is specifically linked to microstructure.
3
The review discusses traditional and emerging PM technologies, including powder production, sintering, microstructure development, and mechanical-property control.
4
Titanium powder metallurgy is presented as a potentially cost-effective alternative to conventional wrought titanium production.
5
Titanium powder production methods are classified into extractive-metallurgy-derived powders and powders made from sponge, ingot, mill products, or scrap.
Research Object
powder metallurgy of titanium, particularly PM Ti and Ti-6Al-4V
Research Subject
production technologies, sintering behavior, microstructure, mechanical and fatigue properties, and hydrogen-enabled microstructural engineering of PM titanium
Publication Details
Publication Date
2017-08-28
Journal
Publisher
ISSN
Cited by
558
Open access PDF
Access Type
Author Information
Download PDF
Subscribe to digest