The Influence of Processing and Particle Size on Binderless Particleboards Made from Arundo donax L. Rhizome

Влияние обработки и размера частиц на изготовление бесклеевых древесно-стружечных плит из корневищ Arundo donax L.
Manuel Ferrández-Villena, Antonio Ferrández-García, Teresa García-Ortuño, María Teresa Ferrández-García, Clara Eugenia Ferrández-García
2020-03-21

Arundo donax rhizomebinderless particleboardsmechanical propertiesparticle sizepressing cycles
The giant reed (Arundo donax L.) is considered one of the world’s 100 worst invasive species. The main method by which this species propagates is by growth of scattered fragments of rhizome, spreading without control with very strong, deep roots. Agricultural waste consists of lignocellulosic materials that can substitute natural wood and offer a suitable alternative with which to manufacture boards for furniture, packaging and building purposes. The objectives of this work were to obtain binderless particleboards using giant reed rhizome as the raw material, to evaluate their mechanical and physical properties according to the applicable European standards and to assess the self-binding mechanism of the particles in the board. Six types of boards (12 classes) were manufactured with giant reed rhizome biomass. They were manufactured with a temperature of 110 °C, a pressure of 2.5 MPa and pressing times of 7 and 15 min, applying one or two pressing cycles. The results achieved for modulus of rupture (14.2 N/mm2), modulus of elasticity (2052.45 N/mm2) and internal bonding strength (1.12 N/mm2) show that the mechanical properties were improved by using a smaller rhizome particle size and two pressing cycles.
1
Boards were produced from six material types across 12 classes at 110 °C, 2.5 MPa, and pressing times of 7 or 15 minutes.
2
Giant reed rhizome was successfully used to manufacture binderless particleboards without added adhesive.
3
Reducing rhizome particle size and applying two pressing cycles improved the particleboards’ mechanical properties.
4
The best reported performance reached a modulus of rupture of 14.2 N/mm², modulus of elasticity of 2052.45 N/mm², and internal bonding strength of 1.12 N/mm².
5
The study evaluated physical and mechanical properties according to applicable European standards and investigated particle self-binding.
6
Арматура из корневищ гигантского тростника была успешно изготовлена без связующего.
7
Наилучшие показатели составили: предел прочности при изгибе 14,2 Н/мм², модуль упругости 2052,45 Н/мм² и прочность при внутреннем скалывании 1,12 Н/мм².
8
Плиты производили из шести типов материала, объединённых в 12 классов, при температуре 110 °C, давлении 2,5 МПа и времени прессования 7 или 15 минут.
9
Уменьшение размера частиц корневищ и применение двух циклов прессования улучшили механические свойства плит.
10
Физические и механические свойства оценивали по применимым европейским стандартам, а также исследовали механизм самосвязывания частиц.

binderless particleboards made from giant reed (Arundo donax L.) rhizome biomass

the effects of processing conditions and rhizome particle size on board mechanical and physical properties and particle self-binding

Publication Details
Publication Date
2020-03-21
Journal
Publisher
ISSN
Cited by
39
Access Type
Author Information
Authors
Manuel Ferrández-Villena
Antonio Ferrández-García
Teresa García-Ortuño
María Teresa Ferrández-García
Clara Eugenia Ferrández-García
Explore further
Open the scid.ai AI chat with a ready-made request: it will find papers on a similar topic and help build a literature review.
Find similar papers in the chat →
Make a presentation
100%