THE LARGE AREA TELESCOPE ON THE FERMI GAMMA-RAY SPACE TELESCOPE MISSION
Широкоугольный телескоп на борту космической гамма-обсерватории Fermi
2009-05-08
SCID: 54.1/3nf65wfm
Discuss with AI
CsI(Tl) calorimeterFermi Large Area Telescopegamma-ray astronomypair-conversion telescopesilicon strip tracker
Figures from the paper
Abstract (AI)
The Large Area Telescope ( Fermi /LAT, hereafter LAT), the primary instrument on the Fermi Gamma-ray Space Telescope ( Fermi ) mission, is an imaging, wide field-of-view (FoV), high-energy γ-ray telescope, covering the energy range from below 20 MeV to more than 300 GeV. The LAT was built by an international collaboration with contributions from space agencies, high-energy particle physics institutes, and universities in France, Italy, Japan, Sweden, and the United States. This paper describes the LAT, its preflight expected performance, and summarizes the key science objectives that will be addressed. On-orbit performance will be presented in detail in a subsequent paper. The LAT is a pair-conversion telescope with a precision tracker and calorimeter, each consisting of a 4 × 4 array of 16 modules, a segmented anticoincidence detector that covers the tracker array, and a programmable trigger and data acquisition system. Each tracker module has a vertical stack of 18 ( x , y ) tracking planes, including two layers ( x and y ) of single-sided silicon strip detectors and high- Z converter material (tungsten) per tray. Every calorimeter module has 96 CsI(Tl) crystals, arranged in an eight-layer hodoscopic configuration with a total depth of 8.6 radiation lengths, giving both longitudinal and transverse information about the energy deposition pattern. The calorimeter's depth and segmentation enable the high-energy reach of the LAT and contribute significantly to background rejection. The aspect ratio of the tracker (height/width) is 0.4, allowing a large FoV (2.4 sr) and ensuring that most pair-conversion showers initiated in the tracker will pass into the calorimeter for energy measurement. Data obtained with the LAT are intended to (1) permit rapid notification of high-energy γ-ray bursts and transients and facilitate monitoring of variable sources, (2) yield an extensive catalog of several thousand high-energy sources obtained from an all-sky survey, (3) measure spectra from 20 MeV to more than 50 GeV for several hundred sources, (4) localize point sources to 0.3–2 arcmin, (5) map and obtain spectra of extended sources such as SNRs, molecular clouds, and nearby galaxies, (6) measure the diffuse isotropic γ-ray background up to TeV energies, and (7) explore the discovery space for dark matter.
Key Findings
1
Its 2.4 sr field of view and tracker geometry enable broad sky coverage while directing most conversion showers into the calorimeter for energy measurement.
2
The Fermi Large Area Telescope is a wide-field imaging gamma-ray telescope covering energies from below 20 MeV to above 300 GeV.
3
The LAT uses a pair-conversion design combining silicon-strip tracking, tungsten converters, a segmented anticoincidence detector, and a hodoscopic CsI(Tl) calorimeter.
4
The calorimeter’s 8.6 radiation-length depth and segmentation provide longitudinal and transverse shower information, supporting high-energy performance and background rejection.
5
The mission aims to rapidly identify gamma-ray bursts and transients, monitor variable sources, and produce an all-sky catalog of several thousand high-energy sources.
Research Object
The Large Area Telescope (LAT) on the Fermi Gamma-ray Space Telescope mission
Research Subject
The LAT’s preflight expected performance and scientific capabilities for high-energy gamma-ray imaging, detection, measurement, source surveying, and transient monitoring
Publication Details
Publication Date
2009-05-08
Journal
Publisher
ISSN
Cited by
4126
Open access PDF
Access Type
Author Information
Download PDF
Subscribe to digest