Hydroprocessing of bio-crude from continuous hydrothermal liquefaction of microalgae

Гидропереработка биосырья, полученного при непрерывном гидротермальном ожижении микроводорослей
Bidhya Kunwar, Brajendra Kumar Sharma, Andrew Barry Ross, Patrick Biller
2015-07-02

CoMo and NiMo catalystsbio-crude hydroprocessingfuel fractionationhydrothermal liquefactionmicroalgae bio-crude
Hydrothermal liquefaction (HTL) has developed as one of the most promising technologies for biofuel production from wet biomass feedstocks in recent years. In the current study, a microalgae slurry was processed in a continuous flow hydrothermal processing unit capable of 2.5 l/h flow rates, temperatures of 350 °C and pressure of up to 206 bar. 40 wt.% bio-crude yields were obtained when processing Chlorella at residence times of 1.4 and 5.8 min . The higher heating value of the bio-crude was approximately 35 MJ/kg, however the nitrogen content of 6% and oxygen content of 11% render it unsuitable for direct combustion. In order to investigate the upgrading potential, the bio-crude was hydroprocessed using CoMo and NiMo catalysts at two temperatures (350 °C and 405 °C) in a stirred reactor. Both catalysts showed similar activity during hydroprocessing. Nitrogen content was typically reduced by 60% at 405 °C whereas oxygen content was reduced by 85%. Fractionation of the upgraded oils result in approximately 25% gasoline, 50% diesel and 25% heavy fuel oil fractions. Further analysis of oils by GC–MS, Sim-Dis and elemental analysis give insight into the fuel quality and nitrogen fractionation. The majority of oxygen is shown to be associated with high molecular weight material and can be reduced further following solvent extraction of the oils while the nitrogen content could only be reduced slightly.
1
At 405 °C, hydroprocessing typically reduced nitrogen by 60% and oxygen by 85%.
2
CoMo and NiMo catalysts exhibited similar hydroprocessing activity at 350 °C and 405 °C.
3
Continuous hydrothermal liquefaction of Chlorella at 350 °C produced approximately 40 wt.% bio-crude at 1.4- and 5.8-minute residence times.
4
The bio-crude had an approximately 35 MJ/kg higher heating value but contained 6% nitrogen and 11% oxygen, preventing direct combustion.
5
Upgraded oils contained approximately 25% gasoline, 50% diesel, and 25% heavy fuel oil fractions; residual oxygen was concentrated in high-molecular-weight material, while nitrogen was difficult to remove further.

bio-crude produced by continuous hydrothermal liquefaction of microalgae

the effects of CoMo- and NiMo-catalyzed hydroprocessing on bio-crude upgrading, heteroatom removal, fuel fractionation, and fuel quality

Publication Details
Publication Date
2015-07-02
Journal
Publisher
ISSN
Cited by
300
Access Type
Author Information
Authors
Bidhya Kunwar
Brajendra Kumar Sharma
Andrew Barry Ross
Patrick Biller
Explore further
Open the scid.ai AI chat with a ready-made request: it will find papers on a similar topic and help build a literature review.
Find similar papers in the chat →
Make a presentation
100%