Electrochemical Characterization of Graphene and MWCNT Screen-Printed Electrodes Modified with AuNPs for Laccase Biosensor Development
Электрохимическая характеристика графеновых и МУНТ-содержащих трафаретных электродов, модифицированных наночастицами золота, для разработки лакказного биосенсора
2015-11-20
SCID: 54.1/3rm75785
Discuss with AI
MWCNT screen-printed electrodescyclic voltammetrygold nanoparticlesgraphene screen-printed electrodeslaccase biosensor
Figures from the paper
Abstract (AI)
The aim of this work is to show how the integration of gold nanoparticles (AuNPs) into multi-wall-carbon-nanotubes (MWCNTs) based screen-printed electrodes and into graphene-based screen-printed electrodes (GPHs) could represent a potential way to further enhance the electrochemical properties of those electrodes based on nanoparticles. Laccase from Trametes versicolor (TvL) was immobilized over MWCNTs and GPH previously modified with AuNPs (of 5 and 10 nm). The characterization of the modified electrode surface has been carried out by cyclic voltammetry. The results showed that the use of AuNPs for modification of both graphene and MWCNTs screen-printed electrode surfaces would increase the electrochemical performances of the electrodes. MWCNTs showed better results than GPH in terms of higher electroactive area formation after modification with AuNPs. The two modified nanostructured electrodes were successively proven to efficiently immobilize the TvL; the electrochemical sensing properties of the GPH- and MWCNT-based AuNPs-TvL biosensors were investigated by choosing 2,2′-Azino-bis(3-ethylbenzothiazoline-6-sulfonic-acid diammonium salt (ABTS), catechol and caffeic acid as laccase mediators; and the kinetic parameters of the laccase biosensor were carefully evaluated.
Key Findings
1
Gold nanoparticle modification enhanced the electrochemical performance of both graphene and MWCNT screen-printed electrodes.
2
Kinetic parameters of the graphene- and MWCNT-based laccase biosensors were systematically evaluated.
3
Laccase from Trametes versicolor was successfully immobilized on both AuNP-modified graphene and MWCNT electrodes.
4
MWCNT-based electrodes exhibited greater electroactive-area formation after AuNP modification than graphene-based electrodes.
5
The resulting AuNP–laccase biosensors were evaluated using ABTS, catechol, and caffeic acid as laccase mediators.
Research Object
Graphene- and MWCNT-based screen-printed electrodes modified with AuNPs and immobilized laccase from Trametes versicolor
Research Subject
Electrochemical performance, electroactive-area formation, laccase immobilization, sensing properties, and kinetic parameters of the modified electrodes
Publication Details
Publication Date
2015-11-20
Journal
Publisher
ISSN
Cited by
57
Open access PDF
Access Type
Author Information
Download PDF
Subscribe to digest