Oxidation Kinetics of Zirconium Carbide at Relatively Low Temperatures

Кинетика окисления карбида циркония при относительно низких температурах
Shiro Shimada, Tadao Ishil
1990-10-01

Cubic zirconia crystallizationIsothermal oxidationJander equationOxidation activation energyZirconium carbide
The isothermal oxidation of ZrC powders was carried out at relatively low temperatures of 380° to 550°C at oxygen pressures of 1.3, 2.6, and 7.9 kPa under a static total pressure of 39.5 kPa, achieved by mixing with argon, using an electromicrobalance. The oxidation kinetics are described by the diffusion‐controlled Jander's equation, following rapid oxidation in the early stage. Two activation energies were obtained: 138 kJ · mol −1 below about 470°C and 180 kJ · mol −1 above that temperature. The high‐ and low‐temperature oxidation mechanisms are discussed in connection with the crystallization of cubic ZrO 2 , accompanied by the generation of cracks, as well as the formation of carbon in the hexagonal diamond form in the product phase.
1
Isothermal oxidation of ZrC powders was investigated from 380 to 550°C under oxygen pressures of 1.3, 2.6, and 7.9 kPa.
2
Oxidation proceeds through rapid initial oxidation followed by diffusion-controlled kinetics described by Jander’s equation.
3
The apparent activation energy is 138 kJ·mol⁻¹ below approximately 470°C and 180 kJ·mol⁻¹ above that temperature.
4
The results indicate a mechanistic transition near 470°C linked to changes in the oxidized product phase.
5
The temperature-dependent mechanisms are associated with crystallization of cubic ZrO₂, crack formation, and generation of hexagonal-diamond-form carbon in the product.

ZrC powders undergoing isothermal oxidation at relatively low temperatures

Oxidation kinetics and temperature-dependent mechanisms, including diffusion control, activation energies, cubic ZrO2 crystallization with crack generation, and hexagonal-diamond carbon formation

Publication Details
Publication Date
1990-10-01
Journal
Publisher
ISSN
Cited by
123
Access Type
Author Information
Authors
Shiro Shimada
Tadao Ishil
Explore further
Open the scid.ai AI chat with a ready-made request: it will find papers on a similar topic and help build a literature review.
Find similar papers in the chat →
Make a presentation
100%