High spatial resolution three-dimensional mapping of vegetation spectral dynamics using computer vision
Картирование спектральной динамики растительности с высоким пространственным разрешением в трехмерном пространстве с использованием компьютерного зрения
2013-06-05
SCID: 54.1/47t9zg56
Discuss with AI
3D point cloudsEcosynth methodologyStructure from Motioncanopy height modelsunmanned aerial system
Figures from the paper
Abstract (AI)
High spatial resolution three-dimensional (3D) measurements of vegetation by remote sensing are advancing ecological research and environmental management. However, substantial economic and logistical costs limit this application, especially for observing phenological dynamics in ecosystem structure and spectral traits. Here we demonstrate a new aerial remote sensing system enabling routine and inexpensive aerial 3D measurements of canopy structure and spectral attributes, with properties similar to those of LIDAR, but with RGB (red-green-blue) spectral attributes for each point, enabling high frequency observations within a single growing season. This “Ecosynth” methodology applies photogrammetric “Structure from Motion” computer vision algorithms to large sets of highly overlapping low altitude (< 130 m) aerial photographs acquired using off-the-shelf digital cameras mounted on an inexpensive (< USD$4000), lightweight (< 2 kg), hobbyist-grade unmanned aerial system (UAS). Ecosynth 3D point clouds with densities of 30–67 points m− 2 were produced using commercial computer vision software from digital photographs acquired repeatedly by UAS over three 6.25 ha (250 m × 250 m) Temperate Deciduous forest sites in Maryland USA. Ecosynth point clouds were georeferenced with a precision of 1.2–4.1 m horizontal radial root mean square error (RMSE) and 0.4–1.2 m vertical RMSE. Understory digital terrain models (DTMs) and canopy height models (CHMs) were generated from leaf-on and leaf-off point clouds using procedures commonly applied to LIDAR point clouds. At two sites, Ecosynth CHMs were strong predictors of field-measured tree heights (R2 0.63 to 0.84) and were highly correlated with a LIDAR CHM (R 0.87) acquired 4 days earlier, though Ecosynth-based estimates of aboveground biomass and carbon densities included significant errors (31–36% of field-based estimates). Repeated scanning of a 50 m × 50 m forested area at six different times across a 16 month period revealed ecologically significant dynamics in canopy color at different heights and a structural shift upward in canopy density, as demonstrated by changes in vertical height profiles of point density and relative RGB brightness. Changes in canopy relative greenness were highly correlated (R2 = 0.87) with MODIS NDVI time series for the same area and vertical differences in canopy color revealed the early green up of the dominant canopy species, Liriodendron tulipifera, strong evidence that Ecosynth time series measurements can capture vegetation structural and spectral phenological dynamics at the spatial scale of individual trees. The ability to observe canopy phenology in 3D at high temporal resolutions represents a breakthrough in forest ecology. Inexpensive user-deployed technologies for multispectral 3D scanning of vegetation at landscape scales (< 1 km2) heralds a new era of participatory remote sensing by field ecologists, community foresters and the interested public.
Key Findings
1
Ecosynth canopy height models predicted field-measured tree heights with R2 values of 0.63–0.84 and correlated strongly with LIDAR CHMs (R=0.87), but biomass and carbon-density estimates had 31–36% errors.
2
Ecosynth enables routine, inexpensive high-resolution 3D mapping of canopy structure and RGB spectral attributes using low-altitude UAS photography.
3
Ecosynth point clouds achieved 1.2–4.1 m horizontal and 0.4–1.2 m vertical georeferencing RMSE, while supporting LIDAR-like terrain and canopy height models.
4
Repeated surveys generated dense 3D point clouds containing 30–67 points m−2 across three 6.25-hectare temperate deciduous forest sites.
5
The system uses Structure from Motion on overlapping photographs from off-the-shelf cameras mounted on a lightweight UAS costing less than USD$4000.
Research Object
Temperate deciduous forest canopies and their three-dimensional structure and RGB spectral attributes measured by repeated low-altitude UAS remote sensing
Research Subject
High-spatial-resolution phenological dynamics of canopy structure and spectral traits, including the accuracy and temporal capability of Ecosynth 3D measurements
Publication Details
Publication Date
2013-06-05
Journal
Publisher
ISSN
Cited by
672
Open access PDF
Access Type
Author Information
Download PDF
Subscribe to digest