Binderless boards made of milled coconut husk: an analysis of the technical feasibility and process restraints

Бесклеевые плиты из измельчённой кокосовой шелухи: анализ технической осуществимости и технологических ограничений
Thomas Böger, Sauro Bianchi, Corinna Salzer, Frédéric Pichelin
2017-11-22

binderless coconut husk boardsfibreboard mechanical propertiesindustrial-scale panel productionmat-forming technologytailored degassing
The possibility of producing binderless panels made of milled coconut husk, a largely available by-product of the coconut oil industry, has been shown in previous researches. Long pressing times and a high risk of blisters have however hindered the industrial implementation of the process. In this study, a more energy-efficient manufacturing process, involving a tailored degassing step, was developed on a laboratory scale and then validated at an industrial size (2 × 1 m2). To achieve mechanical properties close to the European and Japanese standards for fibreboards and to avoid the delamination of the boards, final densities between 900 and 1000 kg m−3 had to be targeted. Similarly, a successful board production was only possible if the moisture content of the husk was between 10 and 25%. The need for a suitable mat-forming technology to avoid the risk of warping of the panel was highlighted.
1
A suitable mat-forming technology is needed to reduce panel warping during manufacturing.
2
A tailored degassing step enabled a more energy-efficient binderless coconut-husk board process and reduced constraints associated with long pressing times and blister formation.
3
Successful board production required coconut husk moisture contents between 10% and 25%.
4
Targeting final board densities of 900–1000 kg m⁻³ was necessary to approach European and Japanese fibreboard mechanical standards and prevent delamination.
5
The laboratory-scale process was successfully validated for industrial-size panels measuring 2 × 1 m².

binderless boards made of milled coconut husk

technical feasibility and process constraints of manufacturing the boards, including the effects of degassing, final density, husk moisture content, pressing time, blistering, delamination, and mat-forming on production and board quality

Publication Details
Publication Date
2017-11-22
Journal
Publisher
ISSN
Cited by
10
Access Type
Author Information
Authors
Thomas Böger
Sauro Bianchi
Corinna Salzer
Frédéric Pichelin
Explore further
Open the scid.ai AI chat with a ready-made request: it will find papers on a similar topic and help build a literature review.
Find similar papers in the chat →
Make a presentation
100%