Membrane‐Less Biofuel Cell Based on Cellobiose Dehydrogenase (Anode)/Laccase (Cathode) WiredviaSpecific Os‐Redox Polymers
Безмембранный биотопливный элемент на основе целлобиозодегидрогеназы (анод)/лакказы (катод), соединённых посредством специфических окислительно-восстановительных полимеров с комплексами осмия
2009-02-01
SCID: 54.1/4ug35rz6
Discuss with AI
Os-redox polymerscellobiose dehydrogenaseenzyme wiringlaccase biocathodemembrane-free biofuel cell
Figures from the paper
Abstract (AI)
Abstract A membrane‐free biofuel cell (BFC) is reported based on enzymes wired to graphite electrodes by means of Os‐complex modified redox polymers. For the anode cellobiose dehydrogenase (CDH) is used as a biocatalyst whereas for the cathode a laccase was applied. This laccase is a high‐potential laccase and hence able to reduce O2to H2O at a formal potential higher than +500 mVversusAg/AgCl. In order to establish efficient electrochemical contact between the enzymes and graphite electrodes electrodeposition polymers containing Os‐complex with specifically designed monomer compositions and formal potentials of the coordinatively bound Os‐complex were synthesised and used to wire the enzymes to the electrodes. The newly designed CDH/Os‐redox polymer anode was characterised at different pH values and optimised with respect to the nature of the polymer and the enzyme‐to‐polymer ratio. The resulting BFC was evaluated running on β‐lactose as a fuel and air/O2as an oxidising agent. The power output, the maximum current density and the electromotor force (Eemf) were found to be affected by the pH value, resulting in a maximum power output of 1.9 μW cm–2reached at pH 4.3, a maximum current density of about 13 μA cm–2at pH 3.5, and the highestEemfapproaching 600 mV at pH 4.0.
Key Findings
1
A membrane-free biofuel cell was constructed using cellobiose dehydrogenase at the anode and high-potential laccase at the cathode.
2
Os-complex-modified redox polymers with tailored monomer compositions and formal potentials efficiently wired both enzymes to graphite electrodes.
3
The cellobiose dehydrogenase anode was optimized by varying polymer chemistry, enzyme-to-polymer ratio, and pH.
4
The maximum current density was approximately 13 μA cm−2 at pH 3.5, while the electromotor force approached 600 mV at pH 4.0.
5
Using β-lactose fuel and air or oxygen oxidant, the biofuel cell achieved a maximum power output of 1.9 μW cm−2 at pH 4.3.
Research Object
A membrane-free biofuel cell based on a cellobiose dehydrogenase/Os-redox polymer anode and a laccase/Os-redox polymer cathode
Research Subject
The effects of pH, Os-redox polymer composition, and enzyme-to-polymer ratio on enzyme-electrode wiring and biofuel-cell performance, including power output, current density, and electromotive force
Publication Details
Publication Date
2009-02-01
Journal
Publisher
ISSN
Access Type
Author Information
Download PDF
Subscribe to digest