Fabrication and mechanical characterization of binderless boards from sugarcane bagasse fibers

Изготовление и механическая характеристика бес связующих плит из волокон жмыха сахарного тростника
Iskandar Hasanuddin, Indra Mawardi, Faurantia Faurantia
2025-04-01

binderless boardshot pressingmechanical characterizationsugarcane bagasse fibersthickness swelling
Agricultural waste management is a pressing environmental concern, as traditional disposal methods like incineration contribute to pollution. This study explores the fabrication and evaluation of binderless boards made from sugarcane bagasse fibers, eliminating the need for synthetic binders. Bagasse fibers were processed at mesh sizes of 20 and 40, then hot-pressed at 190°C under 9.6 MPa pressure for 15 and 25 minutes, achieving a targeted thickness of 10 mm. The physical and mechanical properties, including density, water absorption, thickness swelling, Modulus of Rupture (MOR), and Modulus of Elasticity (MOE), were analyzed. Results showed that particle size and pressing time significantly influenced board properties. The highest performance was observed in the E25 sample (40-mesh, 25-minute pressing), with a density of 0.52 g/cm³, MOR of 2.69 MPa, MOE of 293.82 MPa, water absorption of 134.66%, and thickness swelling of 16.80%. These findings suggest that optimizing particle size and pressing conditions enhances binderless board strength and dimensional stability, making sugarcane bagasse a viable raw material for sustainable panel production.
1
Binderless boards were successfully fabricated from sugarcane bagasse fibers without synthetic binders using hot pressing at 190°C and 9.6 MPa.
2
Optimizing fiber particle size and pressing duration supports sugarcane bagasse as a viable raw material for sustainable panel production.
3
Particle size and pressing time significantly affected the boards’ physical and mechanical properties.
4
The E25 sample showed water absorption of 134.66% and thickness swelling of 16.80%, indicating improved dimensional stability relative to less optimized conditions.
5
The best-performing E25 formulation used 40-mesh fibers pressed for 25 minutes, achieving a density of 0.52 g/cm³, MOR of 2.69 MPa, and MOE of 293.82 MPa.

binderless boards made from sugarcane bagasse fibers

the effects of particle size and hot-pressing time on the boards’ physical and mechanical properties, including density, water absorption, thickness swelling, MOR, and MOE

Publication Details
Publication Date
2025-04-01
Journal
Publisher
ISSN
Cited by
4
Access Type
Author Information
Authors
Iskandar Hasanuddin
Indra Mawardi
Faurantia Faurantia
Explore further
Open the scid.ai AI chat with a ready-made request: it will find papers on a similar topic and help build a literature review.
Find similar papers in the chat →
Make a presentation
100%