Development of a probe for inner profile measurement and flaw detection

Разработка зонда для измерения внутреннего профиля и обнаружения дефектов
Toshitaka Wakayama, Tôru Yoshizawa, Yoshihisa Kamakura
2011-09-08

flaw detectioninner profile measurementnon-contact inspectionoptical sectioningtriangulation
It is one of the important necessities to precisely measure the inner diameter and/or the inner profile of pipes, tubes and other objects similar in shape. Especially in mechanical engineering field, there are many requests from automobile industry because the inner surface of engine blocks and other die casts are strongly required to be inspected and measured by non-contact methods (not by the naked eyes inspection using a borescope). If the inner diameter is large enough like water pipes or drain pipes, complicated and large equipment may be applicable. However, small pipes with a diameter ranging from 10mm to 100mm are difficult to be inspected by such a large instrument as is used for sewers inspection. And we have proposed an instrument which has no moving elements such as a rotating mirror or a prism for scanning a beam. Our measurement method is based on optical sectioning using triangulation. This optically sectioned profile of an inner wall of pipe-like objects is analyzed to produce numerical data of inner diameter or profile. Here, we report recent development of the principle and applications of the optical instrument with a simple and compact configuration. In addition to profile measurement, we found flaws and defects on the inner wall were also detected by using the similar principle. Up to now, we have developed probes with the diameter of 8mm to 25mm for small size objects and another probe (80 mm in diameter) for such a larger container with the dimensional size of 600mm.
1
A compact optical probe measures inner diameters and profiles of pipe-like objects using triangulation-based optical sectioning without moving scanning elements.
2
Probes with diameters of 8–25 mm were developed for small objects, alongside an 80 mm probe for containers up to 600 mm in size.
3
The method enables non-contact inspection of small pipes measuring approximately 10–100 mm in diameter, where large sewer-inspection instruments are impractical.
4
The optical instrument can detect flaws and defects on inner walls in addition to producing numerical profile and diameter measurements.

Inner walls and profiles of small pipes, tubes, engine blocks, die casts, and other pipe-like objects

Non-contact measurement of inner diameter and profile, together with detection of flaws and defects on inner walls

Publication Details
Publication Date
2011-09-08
Journal
Publisher
ISSN
Access Type
Author Information
Authors
Toshitaka Wakayama
Tôru Yoshizawa
Yoshihisa Kamakura
Explore further
Open the scid.ai AI chat with a ready-made request: it will find papers on a similar topic and help build a literature review.
Find similar papers in the chat →
Make a presentation
100%