Selected Bearing Problems of Old Railway Bridges Located On Mining Areas in Poland

Выборочные проблемы опираний старых железнодорожных мостов, расположенных в районах добычи полезных ископаемых в Польше
Piotr Bętkowski
2019-02-23

Building Information Modelling (BIM) for bridge maintenancekinematic freedom of bearingsmining-induced ground deformationrailway bridge bearingsstructural health monitoring (SHM)
In this article are discussed bearing problems of old railway bridges located on mining areas in Poland. The problem is important because the old railway bridges in the areas of active mining exploitation are still in use, but often lack of money for their replacement or major reconstruction. Railway traffic is still underway after these objects, but the requirements for increasing the speed of rolling stock are bumped up. The article applies to bridge objects, which have the static scheme of the freely supported beam, which is universally used, and it is a structural solution. The article describes how mining exploitation affects bridge bearings and the conditions that bearings should fulfil on mining areas. A short review of Polish technical solutions and Polish literature information's on bearings of railway bridges in mining areas is made, it may be valuable for people dealing with similar problems in other countries. Attention is taken to the features that differ the bridge objects from cubature structures in the context of transferring mining influences, e.g. multi-solid of bridges and elevation of their main structural part (spans) above the ground. The general principles of ensuring kinematic freedom and selection of bearings are discussed. Typical damages and threats to the safety of the rail traffic (e.g. breaking the permanent bearing, blocking the bearing, cutting the head of the pillar) triggered by mining area deformations are pointed out. Author discusses the significant influence of bearings on the resistance of railway objects to mining deformations of the area. The article also draws attention to the necessity of frequent monitoring of bearing condition due to the possibility of sudden damage. Examples of Polish experiences are given, i.e. working SHM (Structural Health Monitoring) system is described. Safe maintenance of the object on the mining area requires a combination of knowledge from the bridge manager and mine and data from automatic monitoring systems, geodetic measurements, technical condition assessments - it indicates the need for proper organization of the process associated with acquisition, use and information flows, e.g. according to standards included in the BIM method (Building Information Modelling).
1
Bridges differ from building structures in transmitting mining influences due to multi-solid construction and elevated spans, affecting bearing behavior.
2
Frequent monitoring of bearing condition is necessary because of the possibility of sudden damage; safe maintenance requires combining manager and mine knowledge, automatic SHM, geodetic measurements, and technical assessments, organized e.g. via BIM standards.
3
Mining exploitation affects bridge bearings and requires bearings to fulfill specific conditions in mining areas, including ensuring kinematic freedom.
4
Old railway bridges located in active mining areas in Poland remain in use but often cannot be replaced or majorly reconstructed due to lack of funds.
5
Typical damages from mining-induced deformations include breaking permanent bearings, bearing blocking, and cutting of pillar heads, posing rail traffic safety threats.

Old railway bridges located on mining areas in Poland

Bearing problems and the performance/selection/kinematic behavior of bridge bearings under mining-induced ground deformations, including damage modes, monitoring needs, and maintenance/selection principles

Publication Details
Publication Date
2019-02-23
Journal
Publisher
ISSN
Access Type
Author Information
Authors
Piotr Bętkowski
Explore further
Open the scid.ai AI chat with a ready-made request: it will find papers on a similar topic and help build a literature review.
Find similar papers in the chat →
Make a presentation
100%