Fabrication of Morphologically Controlled Composites with High Thermal Conductivity and Dielectric Performance from Aluminum Nanoflake and Recycled Plastic Package
Получение морфологически контролируемых композитов с высокой теплопроводностью и диэлектрическими характеристиками на основе алюминиевых нанопластинок и переработанной пластиковой упаковки
2018-11-16
SCID: 54.1/5us6p3z6
Discuss with AI
dielectric losselectrical insulationhigh thermal conductivitymultilayer plastic package wastesurface-oxidized aluminum nanoflakes
Figures from the paper
Abstract (AI)
Polymer composites with high thermal conductivity are highly desirable for modern electronic and electrical industry because of their wide range of applications. However, conventional polymer composites with high thermal conductivity usually suffer from the deterioration of electrical insulation and high dielectric loss, whereas polymer composite materials with excellent electrical insulation and dielectric properties usually possess low thermal conductivity. In this study, combining surface-oxidized aluminum (Al) nanoflake and multilayer plastic package waste (MPW) by powder mixing technique, we report a novel strategy for polymer composites with high thermal conduction, high electrical insulation, and low dielectric loss. The resultant MPW/Al, MPW/Al 400, and MPW/Al 500 composites exhibited the maximum thermal conductivity of 4.8, 3.5, and 1.4 W/mK, respectively, which exceeds those of most of the corresponding composites reported previously. In addition, all the composites still have high insulation (<10 –13 S/cm) and maintain dielectric loss at a relatively low level (<0.025). Such a result is ascribed to the formation of an insulating Al 2 O 3 shell and the continuous three-dimensional filler network, which is revealed by Agari model fitting coefficient. The model of effective medium theory qualitatively demonstrates that the lower interfacial thermal resistances of the MPW/Al composite can also benefit the high thermal conduction. This interfacial engineering strategy provides an effectively method for the fabrication of polymer materials with high-performance thermal management.
Key Findings
1
A powder-mixing strategy combines surface-oxidized aluminum nanoflakes with recycled multilayer plastic package waste to produce multifunctional polymer composites.
2
All composites retain high electrical insulation, with conductivity below 10^-13 S/cm, and relatively low dielectric loss below 0.025.
3
An insulating Al2O3 shell and continuous three-dimensional aluminum filler network enable simultaneous thermal conduction and electrical insulation.
4
Effective-medium analysis indicates that reduced interfacial thermal resistance contributes to the high thermal conductivity of the MPW/Al composite.
5
MPW/Al, MPW/Al 400, and MPW/Al 500 composites achieve maximum thermal conductivities of 4.8, 3.5, and 1.4 W/mK, respectively.
Research Object
MPW/Al polymer composites fabricated from multilayer plastic package waste and surface-oxidized aluminum nanoflakes
Research Subject
The effects of composite morphology and interfacial engineering on thermal conductivity, electrical insulation, dielectric loss, filler-network formation, and interfacial thermal resistance
Publication Details
Publication Date
2018-11-16
Journal
Publisher
ISSN
Cited by
86
Access Type
Author Information
Download PDF
Subscribe to digest
References available in scid.ai4
Interface effect on thermal conductivity of carbon nanotube composites2004
Thermally Conductive Graphene-Polymer Composites: Size, Percolation, and Synergy Effects2015
A Combination of Boron Nitride Nanotubes and Cellulose Nanofibers for the Preparation of a Nanocomposite with High Thermal Conductivity2017
Thermal Management in Nanofiber-Based Face Mask2017