Force Sensing Resistor and Evaluation of Technology for Wearable Body Pressure Sensing
Резистор, чувствительный к силе, и оценка технологии для носимых устройств измерения давления на тело
2016-01-01
SCID: 54.1/6bx2tqvu
Discuss with AI
Velostat resistive materialforce sensing resistorprinted conductive ink electrodesrepeatabilitywearable pressure sensing
Figures from the paper
Abstract (AI)
Wearable technologies are gaining momentum and widespread diffusion. Thanks to devices such as activity trackers, in form of bracelets, watches, or anklets, the end-users are becoming more and more aware of their daily activity routine, posture, and training and can modify their motor-behavior. Activity trackers are prevalently based on inertial sensors such as accelerometers and gyroscopes. Loads we bear with us and the interface pressure they put on our body also affect posture. A contact interface pressure sensing wearable would be beneficial to complement inertial activity trackers. What is precluding force sensing resistors (FSR) to be the next best seller wearable? In this paper, we provide elements to answer this question. We build an FSR based on resistive material (Velostat) and printed conductive ink electrodes on polyethylene terephthalate (PET) substrate; we test its response to pressure in the range 0–2.7 kPa. We present a state-of-the-art review, filtered by the need to identify technologies adequate for wearables. We conclude that the repeatability is the major issue yet unsolved.
Key Findings
1
A state-of-the-art review assesses pressure-sensing technologies according to their suitability for wearable applications.
2
Body-pressure sensing wearables could complement inertial activity trackers by measuring contact interface pressures that influence posture.
3
The analysis identifies repeatability as the major unresolved obstacle preventing FSRs from becoming widely adopted wearable sensors.
4
The fabricated FSR is experimentally evaluated under pressures ranging from 0 to 2.7 kPa, relevant to wearable body-pressure sensing.
5
The study develops a force-sensing resistor using Velostat resistive material and printed conductive-ink electrodes on a polyethylene terephthalate substrate.
Research Object
Velostat-based force sensing resistor with printed conductive ink electrodes on a PET substrate for wearable body-pressure sensing
Research Subject
Pressure-response range, wearable suitability, and repeatability of the force sensing resistor
Publication Details
Publication Date
2016-01-01
Journal
Publisher
ISSN
Cited by
168
Open access PDF
Access Type
Author Information
Download PDF
Subscribe to digest