Metal oxide semiconducting nanomaterials for air quality gas sensors: operating principles, performance, and synthesis techniques

Полупроводниковые наноматериалы на основе оксидов металлов для газовых датчиков качества воздуха: принципы работы, характеристики и методы синтеза
Nishchay Angel Isaac, Ilje Pikaar, George Biskos
2022-04-21

air quality gas sensorschemiresistive sensorsgas sensor synthesismetal oxide semiconductorsnanostructured materials
To meet requirements in air quality monitoring, sensors are required that can measure the concentration of gaseous pollutants at concentrations down to the ppb and ppt levels, while at the same time they exhibiting high sensitivity, selectivity, and short response/recovery times. Among the different sensor types, those employing metal oxide semiconductors (MOSs) offer great promises as they can be manufactured in easy/inexpensive ways, and designed to measure the concentration of a wide range of target gases. MOS sensors rely on the adsorption of target gas molecules on the surface of the sensing material and the consequent capturing of electrons from the conduction band that in turn affects their conductivity. Despite their simplicity and ease of manufacturing, MOS gas sensors are restricted by high limits of detection (LOD; which are typically in the ppm range) as well as poor sensitivity and selectivity. LOD and sensitivity can in principle be addressed by nanostructuring the MOSs, thereby increasing their porosity and surface-to-volume ratio, whereas selectivity can be tailored through their chemical composition. In this paper we provide a critical review of the available techniques for nanostructuring MOSs using chemiresistive materials, and discuss how these can be used to attribute desired properties to the end gas sensors. We start by describing the operating principles of chemiresistive sensors, and key material properties that define their performance. The main part of the paper focuses on the available methods for synthesizing nanostructured MOSs for use in gas sensors. We close by addressing the current needs and provide perspectives for improving sensor performance in ways that can fulfill requirements for air quality monitoring.
1
Despite manufacturing simplicity, conventional MOS sensors typically have ppm-range detection limits and suffer from inadequate sensitivity and selectivity for stringent air-quality monitoring.
2
MOS sensor selectivity can be tailored through control of the sensing material’s chemical composition.
3
Metal oxide semiconductor gas sensors are inexpensive, versatile, and suitable for detecting a wide range of target gases through adsorption-induced conductivity changes.
4
Nanostructuring MOS materials can improve detection limits and sensitivity by increasing porosity and surface-to-volume ratio.
5
The review critically evaluates nanostructuring and synthesis techniques, linking material properties to sensor performance and identifying routes toward ppb- and ppt-level air-quality monitoring.

Nanostructured metal oxide semiconductors used in chemiresistive air-quality gas sensors

Operating principles, performance characteristics, and synthesis–property relationships governing gas sensing, including sensitivity, selectivity, detection limit, and response/recovery time

Publication Details
Publication Date
2022-04-21
Journal
Publisher
ISSN
Access Type
Author Information
Authors
Nishchay Angel Isaac
Ilje Pikaar
George Biskos
Explore further
Open the scid.ai AI chat with a ready-made request: it will find papers on a similar topic and help build a literature review.
Find similar papers in the chat →
Make a presentation
100%