Ethanol-Processable, Highly Crystalline Conjugated Polymers for Eco-Friendly Fabrication of Organic Transistors and Solar Cells

Сопрягаемые высококристалличные полимеры, пригодные для переработки с этанолом, для экологически безопасного изготовления органических транзисторов и солнечных элементов
Changyeon Lee, Han Young Woo, Bumjoon J. Kim, Hyoeun Kim, Joon Hak Oh, Youngwoong Kim, Thanh Luan Nguyen, Wonho Lee
2017-05-18

Bis-C60-A fullerene acceptorethanol-processable conjugated polymersoligoethylene glycol side chainsorganic field-effect transistors (OFETs)polymer solar cells (PSCs)
We report eco- and human-friendly fabrication of organic field-effect transistors (OFETs) and polymer solar cells (PSCs) using only ethanol as a processing solvent at ambient condition, in stark contrast to that involving the use of halogenated and/or aromatic solvents. New ethanol-processable electroactive materials, p-type polymer (PPDT2FBT-A) and n-type bis-adduct fullerene acceptor (Bis-C 60 -A) are designed rationally by incorporation of oligoethylene glycol (OEG) side-chains. By ethanol processing, PPDT2FBT-A shows a broad light absorption in the range of 300–700 nm and highly crystalline interchain ordering with out-of-plane interlamellar scattering up to (400) with strong π–π stacking. As a result, the ethanol-processed PPDT2FBT-A OFETs yield high charge-carrier mobilities up to 1.0 × 10 –2 cm 2 V –1 s –1, which is the highest value reported to date from alcohol-processed devices. Importantly, the ethanol-processed PPDT2FBT-A OFET outperformed that processed using typical processing solvent, chlorobenzene (CB), with ∼10-fold enhancement in hole mobility, because the highly edge-on oriented packing of PPDT2FBT-A was produced by ethanol-process. Also, for the first time, significant photovoltaic performance was achieved for the ethanol-processed device of PPDT2FBT-A and Bis-C 60 -A due to the formation of an interpenetrating nanofibrillar morphology of highly crystalline PPDT2FBT-A polymers. The relationships between molecular structure, nanoscale morphology and electronic properties within ethanol-processed OFETs and PSCs were elucidated by comparing to typical CB-processed devices. These comparisons provide important guidelines for the design of new ethanol/water-soluble active layer materials and their use in the development of green solvent-processed efficient OFETs and PSCs.
1
Ethanol processing produces approximately tenfold higher hole mobility than chlorobenzene processing and enables significant photovoltaic performance through an interpenetrating nanofibrillar morphology.
2
Ethanol-processed PPDT2FBT-A OFETs achieve hole mobilities up to 1.0 × 10–2 cm2 V–1 s–1, reported as the highest for alcohol-processed devices.
3
Ethanol-processed PPDT2FBT-A exhibits broad 300–700 nm absorption, highly crystalline ordering, strong π–π stacking, and edge-on molecular packing.
4
Oligoethylene glycol side chains enable ethanol-processable p-type PPDT2FBT-A and n-type Bis-C60-A electroactive materials.
5
The study demonstrates ambient-condition fabrication of OFETs and polymer solar cells using ethanol as the sole processing solvent.

Ethanol-processed organic field-effect transistors and polymer solar cells based on PPDT2FBT-A and Bis-C60-A

Relationships between molecular structure, crystalline nanoscale morphology, molecular orientation, and electronic and photovoltaic performance in ethanol-processed devices

Publication Details
Publication Date
2017-05-18
Journal
Publisher
ISSN
Cited by
72
Access Type
Author Information
Authors
Changyeon Lee
Han Young Woo
Bumjoon J. Kim
Hyoeun Kim
Joon Hak Oh
Youngwoong Kim
Thanh Luan Nguyen
Wonho Lee
Explore further
Open the scid.ai AI chat with a ready-made request: it will find papers on a similar topic and help build a literature review.
Find similar papers in the chat →
Make a presentation
100%