Process and Energy Analysis of Pelleting Agricultural and Woody Biomass Blends
Процессный и энергетический анализ гранулирования смесей сельскохозяйственной и древесной биомассы
2018-05-29
SCID: 54.1/6yqfjxc9
Discuss with AI
agricultural biomassbiomass pelletingcompaction energypellet qualitywoody biomass
Figures from the paper
Abstract (AI)
Unprocessed biomass has low energy density and high transportation cost. The energy generated through biomass can be enhanced by the pelletizing technique. In order to evaluate the energy requirement for the pelletizing of agricultural biomass, three different particle sizes (150–300, 300–425, and 425–600 µm) of reed canary grass (RCG), timothy hay (TH), and switchgrass (SW) were selected in the present work. Furthermore, two woody biomasses (spruce and pine) were also considered under similar experimental conditions for comparison purposes. An Instron machine attached to an in-house built pelletizer unit was employed to produce a single pellet. The energy demand for compacting ground biomass (spruce) with a particle size of 150 µm was lower (2.07 kJ) than those required for particle sizes of 300 µm (2.24 kJ) and 425 µm (2.43 kJ). The energy required for compacting ground reed canary grass, timothy hay, and switchgrass was lower (1.61, 1.97, and 1.68 kJ, respectively) than that required for spruce (2.36 kJ) and pine (2.35 kJ), evaluated at a 159-MPa load and at temperature of about 80 °C. The energy demand for blended biomass was around 2 kJ with the pellet quality approaching that of the pellets made from woody biomass. Overall, blending helped to improve the quality of pellets and lower the compaction energy requirements.
Key Findings
1
At 159 MPa and approximately 80 °C, agricultural biomasses required less compaction energy than woody biomasses: 1.61 kJ for reed canary grass, 1.97 kJ for timothy hay, and 1.68 kJ for switchgrass versus 2.36 kJ for spruce and 2.35 kJ for pine.
2
Blended biomass required approximately 2 kJ for compaction while producing pellet quality approaching that of woody-biomass pellets.
3
Blending agricultural and woody biomass improved pellet quality and reduced compaction energy requirements overall.
4
For spruce, compaction energy increased with particle size, from 2.07 kJ at 150 µm to 2.43 kJ at 425 µm.
5
Pelletizing can increase biomass energy density and reduce the transportation disadvantages of unprocessed biomass.
Research Object
Pellets produced from agricultural and woody biomass blends, including reed canary grass, timothy hay, switchgrass, spruce, and pine
Research Subject
Compaction energy requirements and pellet quality as functions of biomass type, particle size, blending, load, and temperature
Publication Details
Publication Date
2018-05-29
Journal
Publisher
ISSN
Cited by
38
Open access PDF
Access Type
Author Information
Download PDF
Subscribe to digest