Metal oxide semiconductor thin-film transistors for flexible electronics

Тонкоплёночные транзисторы на основе оксидных полупроводников для гибкой электроники
Thomas D. Anthopoulos, Gerhard Tröster, Hendrik A. Faber, Christian Vogt, Niko S. Munzenrieder, Luisa Petti, Giuseppe Cantarella, Lars Büthe, Francesca Bottacchi
2016-06-01

flexible electronicsmetal oxide semiconductor TFTsphysical vapor depositionsolution processingthin-film transistors
The field of flexible electronics has rapidly expanded over the last decades, pioneering novel applications, such as wearable and textile integrated devices, seamless and embedded patch-like systems, soft electronic skins, as well as imperceptible and transient implants. The possibility to revolutionize our daily life with such disruptive appliances has fueled the quest for electronic devices which yield good electrical and mechanical performance and are at the same time light-weight, transparent, conformable, stretchable, and even biodegradable. Flexible metal oxide semiconductor thin-film transistors (TFTs) can fulfill all these requirements and are therefore considered the most promising technology for tomorrow's electronics. This review reflects the establishment of flexible metal oxide semiconductor TFTs, from the development of single devices, large-area circuits, up to entirely integrated systems. First, an introduction on metal oxide semiconductor TFTs is given, where the history of the field is revisited, the TFT configurations and operating principles are presented, and the main issues and technological challenges faced in the area are analyzed. Then, the recent advances achieved for flexible n-type metal oxide semiconductor TFTs manufactured by physical vapor deposition methods and solution-processing techniques are summarized. In particular, the ability of flexible metal oxide semiconductor TFTs to combine low temperature fabrication, high carrier mobility, large frequency operation, extreme mechanical bendability, together with transparency, conformability, stretchability, and water dissolubility is shown. Afterward, a detailed analysis of the most promising metal oxide semiconducting materials developed to realize the state-of-the-art flexible p-type TFTs is given. Next, the recent progresses obtained for flexible metal oxide semiconductor-based electronic circuits, realized with both unipolar and complementary technology, are reported. In particular, the realization of large-area digital circuitry like flexible near field communication tags and analog integrated circuits such as bendable operational amplifiers is presented. The last topic of this review is devoted for emerging flexible electronic systems, from foldable displays, power transmission elements to integrated systems for large-area sensing and data storage and transmission. Finally, the conclusions are drawn and an outlook over the field with a prediction for the future is provided.
1
Flexible metal oxide semiconductor TFTs are identified as a leading technology for future electronics because they can combine electrical performance with lightweight, transparency, conformability, stretchability, and potential biodegradability.
2
Flexible n-type metal oxide TFTs fabricated by physical vapor deposition and solution processing demonstrate low-temperature fabrication, high carrier mobility, high-frequency operation, and extreme mechanical bendability.
3
The review evaluates promising metal oxide materials for flexible p-type TFTs and summarizes progress in unipolar and complementary metal oxide semiconductor circuits.
4
The review traces the field’s development from individual flexible TFTs through large-area circuits to fully integrated electronic systems, while analyzing configurations, operating principles, and technical challenges.
5
These TFTs can additionally provide transparency, conformability, stretchability, and water dissolubility, enabling applications including wearable devices, electronic skins, and transient implants.

Flexible metal oxide semiconductor thin-film transistors (TFTs), including their integrated circuits and systems

Their fabrication, electrical and mechanical performance, material implementations, and integration into flexible electronic circuits and systems

Publication Details
Publication Date
2016-06-01
Journal
Publisher
ISSN
Cited by
679
Access Type
Author Information
Authors
Thomas D. Anthopoulos
Gerhard Tröster
Hendrik A. Faber
Christian Vogt
Niko S. Munzenrieder
Luisa Petti
Giuseppe Cantarella
Lars Büthe
Francesca Bottacchi
Explore further
Open the scid.ai AI chat with a ready-made request: it will find papers on a similar topic and help build a literature review.
Find similar papers in the chat →
Make a presentation
100%