Bulk Defect Suppression of Micrometer-Thick Perovskite Single Crystals Enables Stable Photovoltaics
Подавление объемных дефектов в микрометровых монокристаллах перовскита обеспечивает стабильную работу фотоэлектрических устройств
2022-06-09
SCID: 54.1/8jgaahfr
Discuss with AI
bulk defect suppressionion migration activation energyperovskite single crystalssingle-crystal perovskite solar cellsultralong carrier transport length
Figures from the paper
Abstract (AI)
Metal halide perovskite single crystals have become emerging candidates for photovoltaic applications due to their better optoelectronic properties and higher stability than their polycrystalline thin-film counterparts. However, in contrast to the rapid enhancement of power conversion efficiency (PCE), the operational stability of single-crystal perovskite solar cells (PSCs) remains far lagging behind. Herein, it is discovered that widely investigated 20 μm-thick single-crystal PSCs show poor operational stability, which is assigned to low crystal quality of these thin single crystals. Subsequently, the crystal quality of formamidinium 0.55 methylammonium 0.45 lead triiodide (FA 0.55 MA 0.45 PbI 3 ) thin single crystals are optimized by adjusting the ion diffusion velocity in confined space, leading to lower trap density, larger ion migration activation energy, and reduced light-induced degradation of material properties. As a result, stable single-crystal PSCs with no efficiency degradation after 330 h of continuous operation at the maximum power point under 1 sun illumination are achieved. Moreover, thickness-dependent device efficiency discloses an ultralong carrier transport length of 200 μm in FA 0.55 MA 0.45 PbI 3 thin single crystals, which is instructive for developing lateral-structure solar cells.
Key Findings
1
Improved crystal quality reduces light-induced material degradation and enables single-crystal solar cells with no efficiency loss after 330 hours of continuous maximum-power-point operation under 1-sun illumination.
2
Optimizing ion diffusion in confined spaces improves FA0.55MA0.45PbI3 crystal quality, lowering trap density and increasing ion-migration activation energy.
3
Thickness-dependent efficiency measurements reveal an ultralong carrier transport length of 200 μm in FA0.55MA0.45PbI3 single crystals, supporting their use in lateral-structure photovoltaics.
4
Widely studied 20 μm-thick perovskite single-crystal solar cells exhibit poor operational stability because of low crystal quality.
Research Object
Micrometer-thick FA0.55MA0.45PbI3 perovskite single-crystal photovoltaic devices
Research Subject
The effects of bulk crystal quality and thickness on defect density, ion migration, light-induced degradation, operational stability, and carrier transport in single-crystal perovskite solar cells
Publication Details
Publication Date
2022-06-09
Journal
Publisher
ISSN
Cited by
41
Access Type
Author Information
Download PDF
Subscribe to digest