Overhang control based on front propagation in 3D topology optimization for additive manufacturing
Управление нависаниями на основе распространения фронта в трёхмерной топологической оптимизации для аддитивного производства
2020-06-22
SCID: 54.1/8wy8hkpq
Discuss with AI
3D topology optimizationadditive manufacturingfront propagationoverhang angleunstructured meshes
Figures from the paper
Abstract (AI)
It is attractive to combine topology optimization (TO) with additive manufacturing (AM), due to the design freedom provided by AM, and the increased performance that can be achieved with TO. One important aspect is to include the design rules associated with the process restrictions of AM to prevent the requirement of relatively large support volumes during printing. This paper presents a TO filter that enforces a minimum overhang angle, resulting in an optimized topology that is printable without the need for support structures. The filter is based on front propagation, which, as it is described by a PDE, allows for a straightforward application on unstructured meshes, to enforce an arbitrary overhang angle. Efficient algorithms developed for front propagation are used in combination with adjoint sensitivities, in order to have a minor influence on the total computational cost. The focus of this work is on the implementation of the filter for high resolution 3D cases, which requires development of the front propagation for tetrahedral elements, and its parallelization.
Key Findings
1
A topology-optimization filter enforces a minimum overhang angle, producing additive-manufacturing designs printable without support structures.
2
Efficient front-propagation algorithms combined with adjoint sensitivities minimize the filter’s additional computational cost.
3
The filter uses PDE-based front propagation, enabling straightforward application on unstructured meshes and enforcement of arbitrary overhang angles.
4
The method is implemented for high-resolution three-dimensional cases using front propagation on tetrahedral elements and parallelization.
Research Object
3D topology-optimized structures for additive manufacturing
Research Subject
overhang-angle control and support-free printability through front-propagation-based filtering
Publication Details
Publication Date
2020-06-22
Journal
Publisher
ISSN
Open access PDF
Access Type
Author Information
Download PDF
Subscribe to digest