Lessons Learned From Alkali/Surfactant/Polymer-Flooding Field Tests in China

Уроки, извлечённые из промысловых испытаний щелочного, поверхностно-активного и полимерного заводнения в Китае
Debin Kong, Binhui Li, Hu Guo, Fuyong Wang, Yiqiang Li, Ruicheng Ma
2018-08-09

ASP floodingDaqing Oil Fieldenhanced oil recoverysurfactant screeningultralow interfacial tension
Summary Although the alkali/surfactant/polymer (ASP) flooding technique used for enhanced oil recovery (EOR) was put forward many years ago, it was not until 2014 that it was first put into practice in industrial applications with hundreds of injectors and producers in the Daqing Oil Field in China. In this study, 30 ASP-flooding field tests in China were reviewed to promote the better use of this promising technology. Up to the present, ASP flooding in the Daqing Oil Field deserves the most attention. Alkali type does affect the ASP-flooding effect. Strong alkali [using sodium hydroxide (NaOH)] ASP flooding (SASP) was given more emphasis than weak alkali [using sodium carbonate (Na2CO3)] ASP flooding (WASP) for a long time in the Daqing Oil Field because of the lower interfacial tension (IFT) of the surfactant and the higher recovery associated with NaOH than with Na2CO3. Other ASP-flooding field tests completed in China all used Na2CO3. With progress in surfactant production, a recent large-scale WASP field test in the Daqing Oil Field produced an incremental oil recovery nearly 30% higher than most previous SASP recoveries and close to the value of the most-successful SASP test. However, the most-successful SASP test was partly attributed to the weak alkali factor. Recent studies have shown that the WASP incremental oil recovery factor could be as good as that of SASP but with much-better economic benefits. Screening of surfactant by IFT test is very important in the ASP-flooding practice in China. Whether dynamic or equilibrium IFT should be selected as criteria in surfactant screening is still in dispute. Many believe the equilibrium IFT is more important than the dynamic IFT in terms of the displacement efficiency; thus, it is better to choose a lower dynamic IFT when the equilibrium IFT meets the 10−3 order-of-magnitude requirement. However, it is impossible for many surfactants to form ultralow equilibrium IFT. Because of the low acid value of the Daqing crude oil, the asphaltene and resin components play a very important role in reducing the oil/water IFT and asphaltene is believed to be more influential, although more work is required to resolve this controversial issue. Whether polymer viscoelasticity can reduce the residual oil saturation is still a matter of debate. Advances in surfactant production and in the overcoming of scaling and produced-fluid-handling challenges form the foundation of the industrial application of ASP flooding. Further work is advised on the emulsification effect of ASP flooding. According to one field test, the EOR routine should be selected depending on consideration of the residual oil type to decide whether to increase the sweep volume and/or displacement efficiency. The micellar flooding failure in one ASP field test in China has led all subsequent field tests in China to choose the “low concentration, large slug” technical route instead of the “high concentration, small slug” one. ASP flooding can increase oil recovery by 30% at a cost of less than USD 30/bbl; thus, this technique can be used in response to low-oil-price challenges.
1
A recent large-scale weak-alkali test at Daqing achieved incremental oil recovery nearly 30% higher than most previous strong-alkali tests and nearly matched the best strong-alkali result.
2
Alkali type significantly affects ASP performance: NaOH-based strong-alkali flooding generally achieved lower surfactant interfacial tension and higher recovery than Na2CO3-based flooding historically.
3
Surfactant screening using interfacial-tension tests is critical, but the relative importance of dynamic versus equilibrium interfacial tension remains unresolved; equilibrium IFT near the 10−3 order is emphasized for displacement efficiency.
4
The review analyzes 30 ASP-flooding field tests in China, with industrial-scale application beginning in 2014 at Daqing Oil Field.
5
Weak-alkali ASP can provide recovery comparable to strong-alkali ASP while offering substantially better economic benefits.

Alkali/surfactant/polymer (ASP) flooding field tests in China

field performance, incremental oil recovery, economic benefits, and surfactant-screening criteria of ASP flooding, including the effects of alkali type and interfacial-tension measurements

Publication Details
Publication Date
2018-08-09
Journal
Publisher
ISSN
Access Type
Author Information
Authors
Debin Kong
Binhui Li
Hu Guo
Fuyong Wang
Yiqiang Li
Ruicheng Ma
Explore further
Open the scid.ai AI chat with a ready-made request: it will find papers on a similar topic and help build a literature review.
Find similar papers in the chat →
Make a presentation
100%