Rapid-phase transitions of GeTe-Sb2Te3 pseudobinary amorphous thin films for an optical disk memory
Быстрые фазовые переходы в аморфных тонких плёнках псевдобинарной системы GeTe–Sb2Te3 для оптической дисковой памяти
1991-03-01
SCID: 54.1/9dechszv
Discuss with AI
GeTe-Sb2Te3 pseudobinary alloysamorphous-crystalline transitionsfcc structurelaser-induced crystallizationphase-change optical memory
Figures from the paper
Abstract (AI)
Amorphous films having a component of the stoichiometric GeTe-Sb2Te3 pseudobinary alloy system, GeSb2Te4 or Ge2Sb2Te5 representatively, were found to have featuring characteristics for optical memory material presenting a large optical change and enabling high-speed one-beam data rewriting. The material films being sandwiched by heat-conductive ZnS layers can be crystallized (low power) or reamorphized (high power) by laser irradiation of very short duration, less than 50 ns. The cooling speed of the sandwiched film is extremely high: more than 1010 deg/s, which permits the molten material to convert to the amorphous state spontaneously; whereas, a low-power pulse irradiation of the same duration changed the exposed portion into the crystalline state. The optical constant changes between the amorphous state and the crystalline state of them were measured to be large: from 4.7+i1.3 to 6.9+i2.6 and from 5.0+i1.3 to 6.5+i3.5, respectively. The crystallized portion was known to have a GeTe-like fcc structure by an analytical experiment using transmission electron microscopy, differential scanning calorimetry, and x-ray and electron diffraction methods. The high crystallization speed is ascribed to (1) the pseudobinary system which can form crystalline compositions without any phase separation, (2) the high symmetry of the fcc structure which is the nearest to the random amorphous structure, (3) the high-energy difference between the amorphous state and the fcc crystal state.
Key Findings
1
Amorphous-to-crystalline optical constants change substantially: 4.7+i1.3 to 6.9+i2.6 and 5.0+i1.3 to 6.5+i3.5.
2
Crystallized material has a GeTe-like face-centered cubic structure; rapid crystallization is attributed to phase-separation-free pseudobinary compositions, structural symmetry, and a large amorphous–crystal energy difference.
3
GeSb2Te4 and Ge2Sb2Te5 amorphous films enable optical-memory rewriting through large optical changes and one-beam laser operation.
4
The sandwiched films cool faster than 10^10 deg/s, allowing molten material to spontaneously reamorphize while low-power pulses induce crystallization.
5
ZnS-sandwiched films can crystallize under low-power or reamorphize under high-power laser pulses shorter than 50 ns.
Research Object
GeTe-Sb2Te3 pseudobinary amorphous thin films, specifically GeSb2Te4 and Ge2Sb2Te5, sandwiched between heat-conductive ZnS layers for optical disk memory
Research Subject
Ultrafast laser-induced reversible amorphous–crystalline phase transitions, including crystallization and reamorphization kinetics, cooling-rate-driven amorphization, optical-constant changes, and the fcc crystallization mechanism
Publication Details
Publication Date
1991-03-01
Journal
Publisher
ISSN
Cited by
1464
Access Type
Author Information
Download PDF
Subscribe to digest
References available in scid.ai1
Cited by6
Phase change memory technology2010
Phase-change random access memory: A scalable technology2008
Tunable nanophotonics enabled by chalcogenide phase‐change materials2020
Unique Bond Breaking in Crystalline Phase Change Materials and the Quest for Metavalent Bonding2018
Phase change materials in non-volatile storage2011
Comparison and analysis of phase change materials-based reconfigurable silicon photonic directional couplers2021