Activation of Wood Surfaces and “Binderless” Wood Composites
Активация поверхности древесины и «бесклеевые» древесные композиты
2023-04-26
SCID: 54.1/9f558y99
Discuss with AI
binderless wood compositesin situ adhesive generationlignin and hemicellulosewood surface activationwood welding
Figures from the paper
Abstract (AI)
This chapter deals with the in situ generation of adhesives and adhesive bondlines directly during the wood bonding process. Self-adhesion and “binderless” boards use inherent wood bonding forces. The term “binderless”, though it is generally used, is not fully correct. Each bonding process needs an adhesive. “Binderless” bonding therefore means that no extra adhesive is used, but that the necessary adhesive is generated in situ out of the wood material during the bonding process, i.e., by activation of the various wood components on the surface, especially lignin and hemicellulose. This includes chemical activation as such but also degradation of wood components to small and reactive compounds; these are then the starting points for polymerization and polycondensation, creating polymers and resin-like substances. The main bottleneck in all “binderless” bonding, however, is the very low reactivity, causing significant and often even extreme prolongation of the necessary press times compared to wood-based panels usually produced with the addition of synthetic wood adhesives. So far, this technology is in use only for the production of hardboards using the wet fiber process, with their high density and much longer press times compared to thin medium density fiberboards (MDFs). Another example is wood welding, where the adhesive is formed in situ under impact of high temperature created by strong friction; especially the lignin melts, flows, and therefore forms the bondline, with strong increase in wood density close to the bondline.
Key Findings
1
In wood welding, friction-generated heat melts and mobilizes lignin to form the bondline, producing strongly increased wood density near the bonded interface.
2
Surface activation primarily involves lignin and hemicellulose, including their degradation into reactive compounds that polymerize or polycondense into resin-like bonding substances.
3
The central bottleneck is very low reactivity, which causes substantially or extremely longer pressing times than conventional wood panels made with synthetic adhesives.
4
The technology is currently used mainly for wet-process hardboards, whose high density and long pressing times limit application compared with thin MDF.
5
“Binderless” wood bonding generates the adhesive in situ from activated wood components, rather than adding an external adhesive.
Research Object
Wood surfaces and wood composites bonded without added adhesive
Research Subject
In situ adhesive generation through activation and degradation of lignin and hemicellulose, including the resulting bonding mechanisms, reactivity, density increase, and pressing-time limitations
Publication Details
Publication Date
2023-04-26
Journal
Publisher
ISSN
Cited by
3
Access Type
Author Information
Download PDF
Subscribe to digest