Numerical Study of Enhanced Oil Recovery Using In Situ Oxy-Combustion in a Porous Combustion Tube
Численное исследование повышения нефтеотдачи с использованием внутрипластового окислительного горения в пористой реакционной трубке
2020-06-12
SCID: 54.1/9je545e4
Discuss with AI
CMG STARSenhanced oil recoveryin situ combustionoxy-combustionoxygen-enriched injection
Figures from the paper
Abstract (AI)
Abstract In situ combustion (ISC) in a one-dimensional combustion porous tube has been modeled numerically and presented in this article. The numerical model has been developed using the cmg stars (2017.10) software and it was used to model especial cases for validation against published experimental data. A comprehensive chemical reaction scheme has been developed and used to simulate the ISC process in the lab scale. Moreover, co-injection of oxygen with carbon dioxide (O2/CO2); and co-injection of enriched air (O2/N2) have been further investigated. In the case of using (O2/N2) as an oxidizer, increasing the oxygen ratio from 21% to 50% leads to increasing the oil recovery factor from 31.66% to 66.8%, respectively. In the case of using (O2/CO2) as an oxidizer, increasing the oxygen ratio from 21% to 50% leads to increasing the oil recovery factor from 35.77% to 70.3%, respectively. It was found that the co-injection of (O2/CO2) gives higher values of the oil recovery factor compared with that given when oxygen-enriched air (O2/N2) is injected for ISC. The change in the produced cumulative hydrogen and hydrogen sulfide is considered small whether using (O2/CO2) or (O2/N2) as an oxidizer.
Key Findings
1
A comprehensive chemical reaction scheme was implemented to simulate laboratory-scale in situ combustion and evaluate alternative oxidizer mixtures.
2
A numerical one-dimensional porous combustion-tube model for in situ combustion was developed in CMG STARS and validated against published experimental data.
3
O2/CO2 co-injection produced higher oil recovery than O2/N2 injection, while cumulative hydrogen and hydrogen sulfide production changed little between oxidizers.
4
With O2/CO2 co-injection, increasing oxygen concentration from 21% to 50% increased oil recovery from 35.77% to 70.3%.
5
With enriched air (O2/N2), increasing oxygen concentration from 21% to 50% raised oil recovery from 31.66% to 66.8%.
Research Object
In situ oxy-combustion enhanced oil recovery in a one-dimensional porous combustion tube
Research Subject
The effects of oxygen-enriched O2/CO2 and O2/N2 co-injection and oxygen concentration on oil recovery and produced hydrogen and hydrogen sulfide
Publication Details
Publication Date
2020-06-12
Journal
Publisher
ISSN
Cited by
11
Access Type
Author Information
Download PDF
Subscribe to digest