Adhesion chemistry of plant-based cellulosic fibers and polymeric matrices in composites: a review

Химия адгезии растительных целлюлозных волокон и полимерных матриц в композитах: обзор
Marzia Dulal, Md Shadhin, Nusrat Jahan Tisha, Raghavan Jayaraman, Mashiur Rahman
2026-01-01

cellulosic fiber-polymer compositesfiber-matrix adhesioninterfacial compatibilitymechanical interlockingweak boundary layers
Plant-based cellulosic fibers are often considered a preferred material choice for polymer composites due to growing environmental concerns. The hierarchical macro- and micro-structures of the reinforcing fibers determine the characteristics of fiber-matrix interfaces and performance of the composite. The non-aligned spatial orientation of cellulosic fibers (when used as discontinuous fibers in composites), variability in the fiber length and diameter, and heterogeneity in the chemical composition exert complex effects on the adhesion behavior in composites. Additionally, cellulosic fiber polymer composites exhibit limited interfacial compatibility with polymer matrices due to the hydrophilicity of the reinforcing materials. The review herein presents the dominant adhesion mechanisms of mechanical interlocking, chemical bonding, physical adhesion, and weak boundary layers and their impact on composite properties. Furthermore, this review studies the relationship between the cellulosic fiber structure-morphology-topography and adhesion mechanisms to address and counteract adhesion problems. For a given fiber diameter, an increase in the fiber length (up to a threshold value) increases the composite properties due to enhancement in adhesion properties. An increase in the fiber length enhances the mechanical interlocking within composites and is beneficial until it induces a curling effect. However, interfacial adhesion in composites decreases with the increase in the fiber or yarn twist due to the increase in compactness, decrease in porosity, and possible reorientation of the twisted fibers or yarns from the loading direction. The percentage cellulose content primarily determines the interface properties, while the non-cellulosic components, such as hemicellulose and lignin, contribute to the formation of weak boundary layers, adversely affecting the fiber-matrix adhesion behavior.
1
Cellulose content primarily determines interface properties, whereas hemicellulose and lignin promote weak boundary layers that impair fiber–matrix adhesion.
2
Fiber non-alignment, dimensional variability, and chemical heterogeneity create complex interfacial adhesion behavior in discontinuous cellulosic fiber composites.
3
For a given fiber diameter, increasing fiber length improves composite properties and adhesion up to a threshold, beyond which curling becomes detrimental.
4
Increasing fiber or yarn twist reduces interfacial adhesion by increasing compactness, decreasing porosity, and potentially misaligning fibers with the loading direction.
5
The review identifies mechanical interlocking, chemical bonding, physical adhesion, and weak boundary layers as dominant adhesion mechanisms in cellulosic fiber–polymer composites.

Plant-based cellulosic fiber–polymer composite interfaces

Adhesion mechanisms and interfacial compatibility governed by fiber structure, morphology, topography, geometry, twist, and chemical composition, and their effects on composite properties

Publication Details
Publication Date
2026-01-01
Journal
Publisher
ISSN
Cited by
18
Access Type
Author Information
Authors
Marzia Dulal
Md Shadhin
Nusrat Jahan Tisha
Raghavan Jayaraman
Mashiur Rahman
Explore further
Open the scid.ai AI chat with a ready-made request: it will find papers on a similar topic and help build a literature review.
Find similar papers in the chat →
Make a presentation
100%