Methanol synthesis using captured CO2 as raw material: Techno-economic and environmental assessment
Синтез метанола с использованием уловленного CO2 в качестве сырья: технико-экономическая и экологическая оценка
2015-08-12
SCID: 54.1/a7d2a25z
Discuss with AI
CHEMCAD process modellingcaptured CO2carbon capture and utilisationmethanol synthesistechno-economic assessment
Figures from the paper
Abstract (AI)
• A carbon utilisation plant that synthesise methanol is simulated in CHEMCAD. • The total amount of CO 2 demand is 1.46 t/t methanol . • The CO 2 not-produced compared to a conventional plant is 0.54 t/t methanol . • Production costs results too high for a financially attractive project. • There is a net potential for CO 2 emissions reduction of 2.71 MtCO 2 /yr in Europe. The purpose of this paper is to assess via techno-economic and environmental metrics the production of methanol (MeOH) using H 2 and captured CO 2 as raw materials. It evaluates the potential of this type of carbon capture and utilisation (CCU) plant on (i) the net reduction of CO 2 emissions and (ii) the cost of production, in comparison with the conventional synthesis process of MeOH Europe. Process flow modelling is used to estimate the operational performance and the total purchased equipment cost; the flowsheet is implemented in CHEMCAD, and the obtained mass and energy flows are utilised as input to calculate the selected key performance indicators (KPIs). CO 2 -based metrics are used to assess the environmental impact. The evaluated MeOH plant produces 440 ktMeOH/yr, and its configuration is the result of a heat integration process. Its specific capital cost is lower than for conventional plants. However, raw materials prices, i.e. H 2 and captured CO 2 , do not allow such a project to be financially viable. In order to make the CCU plant financially attractive, the price of MeOH should increase in a factor of almost 2, or H 2 costs should decrease almost 2.5 times, or CO 2 should have a value of around 222 €/t, under the assumptions of this work. The MeOH CCU-plant studied can utilise about 21.5% of the CO 2 emissions of a pulverised coal (PC) power plant that produces 550 MW net of electricity. The net CO 2 emissions savings represent 8% of the emissions of the PC plant (mainly due to the avoidance of consuming fossil fuels as in the conventional MeOH synthesis process). The results demonstrate that there is a net but small potential for CO 2 emissions reduction; assuming that such CCU plants are constructed in Europe to meet the MeOH demand growth and the quantities that are currently imported, the net CO 2 emissions reduction could be of 2.71 MtCO 2 /yr.
Key Findings
1
A CHEMCAD-simulated CCU plant produces 440 kt of methanol annually using captured CO₂ and H₂, with heat-integrated process configuration.
2
Economic viability would require nearly doubling the methanol price, reducing H₂ costs approximately 2.5-fold, or assigning captured CO₂ a value of about €222 per tonne.
3
Methanol production requires 1.46 tonnes of captured CO₂ per tonne of methanol and avoids 0.54 tonnes of CO₂ emissions compared with conventional synthesis.
4
The plant could utilise approximately 21.5% of emissions from a 550 MW pulverised-coal power plant and achieve net savings of 8% of its emissions, equivalent to 2.71 MtCO₂ annually in Europe.
5
The plant’s specific capital cost is lower than conventional methanol plants, but high H₂ and captured-CO₂ prices make production financially unattractive.
Research Object
A methanol-producing carbon capture and utilisation (CCU) plant using captured CO2 and H2 as raw materials
Research Subject
The techno-economic performance and environmental impact, particularly CO2-emission reduction potential and production-cost viability, of methanol synthesis from captured CO2 and H2
Publication Details
Publication Date
2015-08-12
Journal
Publisher
ISSN
Cited by
920
Open access PDF
Access Type
Author Information
Download PDF
Subscribe to digest
References available in scid.ai2
Cited by4
Power-to-liquid via synthesis of methanol, DME or Fischer–Tropsch-fuels: a review2020
A techno-economic review on carbon capture, utilisation and storage systems for achieving a net-zero CO2 emissions future2022
Formic acid synthesis using CO2 as raw material: Techno-economic and environmental evaluation and market potential2016
A Review of The Methanol Economy: The Fuel Cell Route2020