Variable Shape Tooling for Composite Manufacturing: A Systematic Review

Оснастка переменной формы для производства композитов: систематический обзор
Fabian Neumann
2024-04-03

composite manufacturingdeformable mandrelsshape memory polymersshape-variable toolingsystematic literature review
The choice of material, manufacturing process, and molding tool significantly affects the quality, environmental impact, and cost efficiency of composite components. Producing one-piece hollow profiles with smooth inner surfaces and undercuts presents major challenges for conventional mold concepts. There is yet no thorough review of shape-variable mandrels in composite manufacturing to be found in the literature. This paper provides an overview of research on shape memory polymers and other shape-variable materials used in tooling applications for composite manufacturing. This work covers shape memory, heat shrink, and other deformable tooling concepts that enable the production of one-piece Type V pressure vessels, air intake ducts, or curved struts and tubes. A systematic literature review in combination with a state-of-the-art open-source active learning tool ASReview is conducted. Fifteen relevant studies were identified. Research on shape-variable tooling is mainly conducted by three research groups in the USA and the PRC. The tooling is mostly made of unreinforced thermosets, especially styrene-based ones. Thermoplastic resins are less common, and reinforcements limit the usable elongation in the temporary shape. The shape variability is either a shape memory and/or a softening process, which, in all studies, is activated by heating. Release agents are widely used to ease demolding. No ecological or economical assessment of the manufacturing methods was conducted in the reviewed studies. Three fields for further research that could be identified are as follows: (1) thorough ecological end economical assessment of shape-variable mandrels in comparison with conventional tooling; (2) thermoplastic shape memory polymer mandrels; and (3) further investigation of simulation capabilities for shape memory mandrels.
1
All reviewed shape-change mechanisms are thermally activated through shape memory and/or material softening, and release agents are widely used for demolding.
2
Fifteen relevant studies were identified, with research concentrated mainly in three groups from the USA and the PRC.
3
Shape-variable tooling enables one-piece hollow composite profiles with smooth inner surfaces and undercuts, including Type V pressure vessels, air intake ducts, and curved tubes.
4
The review identifies a literature gap and systematically analyzes shape-variable mandrels for composite manufacturing tooling.
5
The reviewed studies contain no ecological or economic assessments, highlighting needs for comparative sustainability and cost analyses, thermoplastic shape-memory mandrels, and improved simulation methods.
6
Tooling predominantly uses unreinforced styrene-based thermosets; reinforcements restrict elongation, while thermoplastics remain comparatively uncommon.

Shape-variable mandrels and other deformable tooling materials used for composite manufacturing

Their shape variability, material characteristics, activation mechanisms, and applicability to demolding and manufacturing one-piece hollow composite components with undercuts

Publication Details
Publication Date
2024-04-03
Journal
Publisher
ISSN
Cited by
3
Access Type
Author Information
Authors
Fabian Neumann
Explore further
Open the scid.ai AI chat with a ready-made request: it will find papers on a similar topic and help build a literature review.
Find similar papers in the chat →
Make a presentation
100%