Electrolyte Engineering for Efficient Electrochemical Nitrate Reduction to Ammonia on a Titanium Electrode

Электролитная инженерия для эффективного электрохимического восстановления нитратов до аммиака на титановом электроде
Thomas Francisco Jaramillo, Matteo Cargnello, Sarah J. Blair, David M. Koshy, Adam C. Nielander, Joshua M. McEnaney, Jay A. Schwalbe
2020-02-14

Faradaic efficiencyammonia productionelectrochemical nitrate reductionelectrolyte engineeringtitanium cathode
Nitrates from agricultural runoff and industrial waste streams are a notorious waste product and hazardous pollutant. Traditional electrochemical water remediation approaches aim to solve this problem by converting nitrates to environmentally benign N 2 while minimizing the production of environmentally hazardous side products such as ammonia and nitrous oxide in a process known as “denitrification”. We modify this concept and outline an opportunity to optimize the conversion of nitrates into ammonia, which is also a key commodity product used as a fertilizer, potential fuel, and chemical precursor. The electrochemical conversion of nitrates to ammonia recycles the fixed nitrogen and offers an appealing and supplementary alternative to the energy- and resource-intensive Haber-Bosch process. In this study, we investigated the effect of varying electrochemical conditions (pH, nitrate concentration, and applied potential) on the selective reduction of nitrate to ammonia at a titanium cathode. We observed that high concentrations of both protons and nitrate ions are needed to achieve high selectivity, reaching a peak of 82% Faradaic efficiency to ammonia at an applied potential of −1 V versus RHE and a partial current density to NH 3 of −22 mA/cm 2, using 0.4 M [NO 3 – ] at pH ∼0.77. The Ti electrode, as a poor hydrogen evolution catalyst with notable corrosion resistance, provides a large window of operating conditions to achieve high selectivity in the reduction of nitrate anions. Stability of the system was evaluated, and we found a high Faradaic efficiency throughout the course of an 8 h experiment. After electrochemical testing, titanium hydride was observed at the cathode surface. We also show a preliminary technoeconomic study, indicating that it may be feasible to employ an electrochemical strategy for the production of ammonium nitrate.
1
A preliminary technoeconomic analysis suggests electrochemical ammonium nitrate production may be feasible.
2
Electrolyte conditions strongly control nitrate-to-ammonia selectivity at titanium cathodes, with high proton and nitrate concentrations required for optimal performance.
3
The system maintained high ammonia Faradaic efficiency during an 8-hour experiment, although titanium hydride formed on the cathode surface.
4
The titanium electrode achieved a peak ammonia Faradaic efficiency of 82% at −1 V versus RHE, using 0.4 M nitrate at approximately pH 0.77.
5
Titanium’s low hydrogen-evolution activity and corrosion resistance provide a broad operating window for selective nitrate reduction.
6
Under optimal conditions, ammonia production reached a partial current density of −22 mA/cm².

Nitrate-to-ammonia electrochemical reduction at a titanium cathode

The effects of pH, nitrate concentration, and applied potential on ammonia selectivity, Faradaic efficiency, current density, and stability

Publication Details
Publication Date
2020-02-14
Journal
Publisher
ISSN
Cited by
423
Access Type
Author Information
Authors
Thomas Francisco Jaramillo
Matteo Cargnello
Sarah J. Blair
David M. Koshy
Adam C. Nielander
Joshua M. McEnaney
Jay A. Schwalbe
Explore further
Open the scid.ai AI chat with a ready-made request: it will find papers on a similar topic and help build a literature review.
Find similar papers in the chat →
Make a presentation
100%