Lithium Superionic Conduction in BH 4 ‐Substituted Thiophosphate Solid Electrolytes
Сверхионная проводимость лития в тиофосфатных твердых электролитах, замещенных BH₄⁻
2022-12-11
SCID: 54.1/ahy8kk3w
Discuss with AI
BH4− anionsLi-ion batterieslithium thiophosphate solid electrolytessolid-state NMR spectroscopysuperionic conduction
Figures from the paper
Abstract (AI)
Abstract Compared with conventional liquid electrolytes, solid electrolytes can better improve the safety properties and achieve high‐energy‐density Li‐ion batteries. Sulfide‐based solid electrolytes have attracted significant attention owing to their high ionic conductivities, which are comparable to those of their liquid counterparts. Among them, Li thiophosphates, including Li‐argyrodites, are widely studied. In this study, Li thiophosphate solid electrolytes containing BH 4 − anions are prepared via a simple and fast milling method even without heat treatment. The synthesized materials exhibit a high ionic conductivity of up to 11 mS cm −1 at 25 °C, which is much higher than reported values. To elucidate the mechanism behind, the thiophosphate local structure, whose effect on the ionic conductivity remains unclear to date, is investigated. Raman and solid‐state NMR spectroscopies are performed to identify the thiophosphate local structure in the sulfide samples. Based on the analysis results, the ratios of the different thiophosphate units in the prepared electrolyte samples are determined. It is found that the thiophosphate local structure can be varied by changing the amount of LiBH 4 and the milling conditions, which significantly impact the ionic conductivity. The all‐solid‐state cell with the prepared solid electrolyte exhibits superior cycle and rate performances.
Key Findings
1
All-solid-state cells using the prepared electrolyte demonstrated superior cycling and rate performance.
2
BH4−-containing lithium thiophosphate solid electrolytes were synthesized using a simple, rapid milling method without heat treatment.
3
Raman and solid-state NMR analyses identified thiophosphate local structures and quantified the proportions of different thiophosphate units.
4
The prepared materials achieved ionic conductivity up to 11 mS cm−1 at 25 °C, exceeding previously reported values.
5
Varying LiBH4 content and milling conditions changed the thiophosphate local structure and substantially affected ionic conductivity.
Research Object
BH4−-containing lithium thiophosphate sulfide solid electrolytes
Research Subject
The effects of thiophosphate local structure, its composition, and milling conditions on lithium ionic conductivity and all-solid-state cell performance
Publication Details
Publication Date
2022-12-11
Journal
Publisher
ISSN
Cited by
36
Open access PDF
Access Type
Author Information
Download PDF
Subscribe to digest