Air traffic simulation in chemistry-climate model EMAC 2.41: AirTraf 1.0

Моделирование воздушного движения в химио-климатической модели EMAC 2.41: AirTraf 1.0
Hiroshi Yamashita, Volker Grewe, Patrick Jöckel, Florian Linke, Martin Schaefer, Daisuke SASAKI, Daisuke Sasaki
2016-09-21

AirTraf 1.0BADA (Base of Aircraft Data) and ICAO engine performanceDLR fuel flow methodEMAC (ECHAM5/MESSy Atmospheric Chemistry) submodelgenetic algorithm flight trajectory optimization
Abstract. Aviation contributes to anthropogenic climate impact through various emissions. Mobility becomes more and more important to society and hence air transportation is expected to grow further over the next decades. Reducing the climate impact from aviation emissions and building a climate-friendly air transportation system are required for a sustainable development of commercial aviation. A climate optimized routing, which avoids climate sensitive regions by re-routing horizontally and vertically, is an important approach for climate impact reduction. The idea includes a number of different routing strategies (routing options) and shows a great potential for the reduction. To evaluate this, the impact of not only CO2 but also non-CO2 emissions must be considered. CO2 is a long-lived and stable gas, while non-CO2 emissions are short-lived and vary regionally. This study introduces AirTraf (version 1.0) for climate impact evaluations that performs global air traffic simulations on long time scales, including effects of local weather conditions on the emissions. AirTraf was developed as a new submodel of the ECHAM5/MESSy Atmospheric Chemistry (EMAC) model. Air traffic information comprises Eurocontrol's Base of Aircraft Data (BADA Revision 3.9) and International Civil Aviation Organization (ICAO) engine performance data. Fuel use and emissions were calculated by the total energy model based on the BADA methodology and DLR fuel flow method. The flight trajectory optimization was performed by a Genetic Algorithm (GA) with respect to routing options. In the model development phase, two benchmark tests were performed for great circle and flight time routing options. The first test showed that the great circle calculations were accurate to within ±0.05 %, compared to those calculated by other published code. The second test showed that the optimal solution sufficiently converged to the theoretical true-optimal solution. The difference in flight time between the two solutions is less than 0.01 %. The dependence of optimal solutions on initial populations was analyzed. We found that the influence was small (around 0.01 %). The trade-off between the accuracy of GA optimizations and the number of function evaluations is clarified and the appropriate population and generation sizing is discussed. The results showed that a large reduction in number of function evaluations of around 90 % can be achieved with only a small decrease in the accuracy of less than 0.1 %. Finally, one-day AirTraf simulations are demonstrated with the great circle and the flight time routing options for a specific winter day. 103 trans-Atlantic flight plans were used, assuming an Airbus A330-301 aircraft. The results confirmed that AirTraf simulates the air traffic properly for the two options. In addition, the GA successfully found the time-optimal flight trajectories for all airport pairs, reflecting local weather conditions. The consistency check for the one-day AirTraf simulations verified that calculated flight time, fuel consumption, NOx emission index and aircraft weights are comparable to reference data.
1
AirTraf 1.0 is a new EMAC submodel that performs global air traffic simulations including local weather effects on emissions.
2
Benchmark tests: great circle calculations matched Movable Type script to −0.004%, and GA-found flight-time solutions were within 0.01% of theoretical optima.
3
Demonstration with 103 trans-Atlantic Airbus A330-301 flights (winter day) shows AirTraf reproduces flight time, fuel consumption, NOx emission index, and aircraft weights in good agreement with reference data.
4
Flight trajectory optimization uses a genetic algorithm (GA) supporting multiple routing options, including great circle and flight time routing.
5
Fuel use and emissions are computed using BADA 3.9 and ICAO engine data via the total energy model and DLR fuel flow method.
6
GA population dependence is small (~0.01%); reducing function evaluations by ~90% only decreases optimization accuracy by <0.1%, clarifying accuracy vs. computational cost trade-offs.

AirTraf 1.0 submodel of the EMAC chemistry-climate model performing global air traffic simulations (including flight trajectories, fuel use and emissions)

Simulation and optimization of global air traffic trajectories and associated fuel consumption and emissions (CO2 and non-CO2) under local weather conditions, including evaluation of routing options and genetic-algorithm performance/accuracy

Publication Details
Publication Date
2016-09-21
Journal
Publisher
ISSN
Cited by
20
Access Type
Author Information
Authors
Hiroshi Yamashita
Volker Grewe
Patrick Jöckel
Florian Linke
Martin Schaefer
Daisuke SASAKI
Daisuke Sasaki
Explore further
Open the scid.ai AI chat with a ready-made request: it will find papers on a similar topic and help build a literature review.
Find similar papers in the chat →
Make a presentation
100%