An approach for unplanned dilution assessment in open stope with consideration of the stope shape irregularity
Метод оценки непредвиденного разубоживания в открытых очистных камерах с учетом нерегулярности формы камеры
2025-09-29
SCID: 54.1/ba5vhw6p
Discuss with AI
Dilution IndexRock Engineering Systemnumerical modellingstope shape irregularityunplanned dilution
Figures from the paper
Abstract (AI)
This study aims to propose an assessment tool for unplanned dilution, considering the irregularity of the stope shapes due to the overbreak and underbreak of the stope walls. Data from the Ridder-Sokolny mine, an underground mine, located in East Kazakhstan, was used for the study. On the basis of the collected dilution data, the stopes were categorized into three types depending on the extent of the irregularity: simple, semi-complex, and complex shape. Numerical modelling was performed to illustrate the effect of the stope shape complexity on the overall instability, while the Rock Engineering System (RES) was employed to introduce a Dilution Index (DI) with the purpose of quantifying the stope shape irregularity effect. The results suggested that instabilities and rock failure are likely to occur with an increase in the stope shape complexity as tension increases while the strength factor decreases. Furthermore, the stope shape irregularity had the most significant effect on the DI system compared to other parameters affecting the dilution. The results indicated that the DI is a very good predictor of unplanned dilution and a fairly good predictor of stope loss, which indicates advantages over the conventional dilution graph method. It is concluded that the DI could be an alternative for unplanned stope dilution estimations depending on the stope shape complexity.
Key Findings
1
A Rock Engineering System-based Dilution Index quantified the effect of stope shape irregularity and had the strongest influence among dilution-related parameters.
2
Numerical modelling showed that increasing stope shape complexity promotes instability and rock failure through increased tension and reduced strength factor.
3
Stope geometries at the Ridder-Sokolny mine were classified as simple, semi-complex, or complex according to the extent of shape irregularity.
4
The Dilution Index was reported as a very good predictor of unplanned dilution and a fairly good predictor of stope loss, offering an alternative to conventional dilution graphs.
5
The study introduces an assessment tool for unplanned dilution that explicitly accounts for irregular stope shapes caused by wall overbreak and underbreak.
Research Object
open stopes with irregular shapes caused by stope-wall overbreak and underbreak
Research Subject
the effects of stope-shape irregularity and complexity on rock instability, unplanned dilution, and stope loss, including Dilution Index prediction performance
Publication Details
Publication Date
2025-09-29
Journal
Publisher
ISSN
Open access PDF
Access Type
Author Information
Download PDF
Subscribe to digest