Effect of Particle Size Distribution on Powder Packing and Sintering in Binder Jetting Additive Manufacturing of Metals

Влияние распределения размеров частиц на упаковку порошка и спекание при биндераппинге (binder jetting) в аддитивном производстве металлов
Christopher Bryant Williams, Yun Bai, Grady Wagner
2017-05-04

bimodal powder mixturesbinder jetting additive manufacturingpowder packing densitysintered densitysintering shrinkage
The binder jetting additive manufacturing (AM) process provides an economical and scalable means of fabricating complex parts from a wide variety of materials. While it is often used to fabricate metal parts, it is typically challenging to fabricate full density parts without large degree of sintering shrinkage. This can be attributed to the inherently low green density and the constraint on powder particle size imposed by challenges in recoating fine powders. To address this issue, the authors explored the use of bimodal powder mixtures in the context of binder jetting of copper. A variety of bimodal powder mixtures of various particle diameters and mixing ratios were printed and sintered to study the impact of bimodal mixtures on the parts' density and shrinkage. It was discovered that, compared to parts printed with monosized fine powders, the use of bimodal powder mixtures improves the powder's packing density (8.2%) and flowability (10.5%), and increases the sintered density (4.0%) while also reducing the sintering shrinkage (6.4%).
1
Bimodal mixtures increase powder flowability by 10.5% relative to monosized fine powders.
2
Bimodal powder mixtures mitigate challenges of low green density and recoating constraints associated with fine powders, enabling denser, less-shrunk parts in binder jetting.
3
Sintered density of parts produced from bimodal powders increases by 4.0% versus parts from monosized fine powders.
4
Sintering shrinkage is reduced by 6.4% when using bimodal powder mixtures compared to monosized fine powders.
5
Using bimodal powder mixtures in binder jetting of copper improves powder packing density by 8.2% compared to monosized fine powders.

Bimodal copper powder mixtures used in binder jetting additive manufacturing of metal parts

Effect of particle size distribution (bimodal vs monosized) on powder packing, flowability, sintered density, and sintering shrinkage in binder jetting of copper

Publication Details
Publication Date
2017-05-04
Journal
Publisher
ISSN
Cited by
341
Access Type
Author Information
Authors
Christopher Bryant Williams
Yun Bai
Grady Wagner
Explore further
Open the scid.ai AI chat with a ready-made request: it will find papers on a similar topic and help build a literature review.
Find similar papers in the chat →
Make a presentation
100%