Catalytic Hydroprocessing of Fast Pyrolysis Bio-oil from Pine Sawdust
Каталитическая гидропереработка биомасла быстрого пиролиза сосновых опилок
2012-05-17
SCID: 54.1/dc7wwxje
Discuss with AI
catalytic hydroprocessingfast pyrolysis bio-oilfixed-bed reactorpine sawdusttotal acid number
Figures from the paper
Abstract (AI)
Catalytic hydroprocessing has been applied to the fast pyrolysis liquid product (bio-oil) from softwood biomass in a bench-scale continuous-flow fixed-bed reactor system. The intent of the research was to develop process technology to convert the bio-oil into a petroleum refinery feedstock to supplement fossil energy resources and to displace imported feedstock. This paper is focused on the process experimentation and product analysis. A range of operating parameters, including temperature from 170 or 250 to 400 °C in the two-stage reactor and flow rate of 0.19 liquid hourly space velocity, was tested with bio-oil derived from pine wood. Times on stream of up to 90 h were evaluated, and losses of catalyst activity were assessed. Product yields of 0.35–0.45 g of oil product/g of dry bio-oil feed with hydrogen consumptions from 342 to 669 L/L of bio-oil feed were measured. Analyses determined that product oils with densities of 0.82–0.92 g/mL had oxygen contents of 0.2–2.7 wt % and total acid number (TAN) of <0.01–2.7 mg of KOH/g. In summation, the paper provides an initial understanding of the efficacy of hydroprocessing as applied to the Finnish pine bio-oil.
Key Findings
1
Catalytic hydroprocessing of pine-derived fast pyrolysis bio-oil was demonstrated in a bench-scale continuous-flow, two-stage fixed-bed reactor.
2
Hydroprocessed oils had densities of 0.82–0.92 g/mL, oxygen contents of 0.2–2.7 wt %, and total acid numbers below 0.01–2.7 mg KOH/g.
3
Oil product yields were 0.35–0.45 g per gram of dry bio-oil feed, with hydrogen consumption of 342–669 L per liter of bio-oil feed.
4
Operating temperatures from 170 or 250 to 400 °C and a liquid hourly space velocity of 0.19 were evaluated, with catalyst activity monitored for up to 90 hours.
5
The results provide an initial assessment of hydroprocessing pine bio-oil toward a petroleum-refinery feedstock, while also evaluating catalyst deactivation over time.
Research Object
fast pyrolysis bio-oil from pine sawdust (softwood biomass) in catalytic hydroprocessing
Research Subject
hydroprocessing performance, product yields and quality, hydrogen consumption, and catalyst activity loss under varying reactor operating conditions
Publication Details
Publication Date
2012-05-17
Journal
Publisher
ISSN
Cited by
218
Access Type
Author Information
Download PDF
Subscribe to digest