A study of polyethylene packaging films in presence of slip‐agent and anti‐block additives: A tale of surface and bulk crystallinities
Исследование полиэтиленовых упаковочных плёнок в присутствии добавок-скользителей и антиблокирующих добавок: поверхностная и объёмная кристалличность
2025-02-19
SCID: 54.1/dcnvb7tr
Discuss with AI
Anti-block additivesGrazing-incidence X-ray diffractionPolyethylene packaging filmsSlip-agent additivesSurface crystallinity
Figures from the paper
Abstract (AI)
Abstract Polyolefin films are widely used in flexible packaging industries. However, the processing, storage, and application of these polymers pose numerous difficulties due to their high coefficient of friction (COF) and high blocking. Slip‐agent and anti‐block additives are usually used to prevent films from being adhered to each other and to metal rollers. This work aims to study the surface morphology of blown polyethylene films in the presence of these two additives. To do this, various types and concentrations of additives were employed at different ratios of the polymer blend (LDPE/LLDPE). However, it was found that the polymer composition was not as effective as the presence of additives. COF and blocking force measurement, contact angle, haze evaluation, differential scanning calorimetry (DSC), grazing incident x‐ray diffraction (GI‐XRD), and atomic force microscopy (AFM), were utilized to investigate the surface and bulk properties of the films. It was found that the migration of additives leads to the formation of various surface structures thereby making the surface to be more crystalline. The result was a decrease in the COF from ca. 1–0.1 and lowering the blocking force of approximately 8–3 N, highlighting the impact of the optimal concentration of additives. Results showed that the surface energy of the films decreased (20–30 mJ/m2) in the presence of additives due to the formation of a weak boundary layer at the surface. Comparison of DSC and GI‐XRD results showed that crystallinity values in the bulk phase changed from 20%–40% to 30%–50% at the surface for most samples. The lowest and highest of roughness was 22 and 90 nm, respectively, as revealed by AFM. Highlights Various slip‐agent and anti‐blocks were used in polyethylene‐blown films. Coefficient of friction and blocking force were tested at different conditions. Crystallinity of films and other investigations were correlated to obtained data. Experimental design revealed the impact of studied parameters.
Key Findings
1
Additive presence influenced polyethylene film behavior more strongly than LDPE/LLDPE blend composition.
2
Additives decreased film surface energy to 20–30 mJ/m² by creating a weak boundary layer.
3
Optimized additive concentrations reduced the coefficient of friction from approximately 1 to 0.1 and blocking force from about 8 to 3 N.
4
Slip-agent and anti-block additive migration formed diverse surface structures and increased surface crystallinity.
5
Surface crystallinity generally increased from 20–40% in the bulk to 30–50%, while AFM-measured roughness ranged from 22 to 90 nm.
Research Object
blown polyethylene packaging films containing slip-agent and anti-block additives at varying LDPE/LLDPE compositions
Research Subject
the effects of additive type and concentration on surface morphology, surface and bulk crystallinity, surface energy, roughness, coefficient of friction, and blocking force
Publication Details
Publication Date
2025-02-19
Journal
Publisher
ISSN
Cited by
6
Access Type
Author Information
Download PDF
Subscribe to digest