Large-scale metal additive manufacturing: a holistic review of the state of the art and challenges
Крупномасштабное аддитивное производство металлических изделий: комплексный обзор современного состояния и проблем
2021-10-16
SCID: 54.1/dke7khw4
Discuss with AI
deposition trajectory planningdirected energy depositionin-process monitoring and controllarge-scale additive manufacturingrobotic additive manufacturing
Figures from the paper
Abstract (AI)
Additive Manufacturing (AM) has the potential to completely reshape the manufacturing space by removing the geometrical constraints of commercial manufacturing and reducing component lead time, especially for large-scale parts. Coupling robotic systems with direct energy deposition (DED) additive manufacturing techniques allow for support-free printing of parts where part sizes are scalable from sub-metre to multi-metre sizes. This paper offers a holistic review of large-scale robotic additive manufacturing, beginning with an introduction to AM, followed by different DED techniques, the compatible materials and their typical as-built microstructures. Next, the multitude of robotic build platforms that extend the deposition from the standard 2.5 degrees of freedom (DOF) to 6 and 8 DOF is discussed. With this context, the decomposition and slicing of the computerized model will be described, and the challenges of planning the deposition trajectory will be discussed. The different modalities to monitor and control the deposition in an attempt to meet the geometrical and performance specifications are outlined and discussed. A wide range of metals and alloys have been reported and evaluated for large-scale AM parts. These include steels, Ti, Al, Mg, Cu, Ni, Co–Cr and W alloys. Different post-processing steps, including heat treatments, are discussed, along with their microstructures. This paper finally addresses the authors' perspective on the future of the field and the largest knowledge gaps that need to be filled before the commercial implementation of robotic AM.
Key Findings
1
Large-scale additive manufacturing has been demonstrated for steels, Ti, Al, Mg, Cu, Ni, Co–Cr, and W alloys, with post-processing influencing resulting microstructures.
2
Large-scale robotic additive manufacturing extends deposition systems from conventional 2.5 degrees of freedom to 6- and 8-degree-of-freedom platforms.
3
Monitoring and control strategies are required to meet geometric and performance specifications during large-scale metal deposition.
4
Robotic direct energy deposition enables support-free manufacturing of scalable metal parts ranging from sub-metre to multi-metre sizes.
5
Significant knowledge gaps remain in process planning, control, materials, and post-processing before robotic additive manufacturing can achieve commercial implementation.
6
The review identifies model decomposition, slicing, and deposition-trajectory planning as central challenges for producing large parts accurately.
Research Object
large-scale robotic metal additive manufacturing using direct energy deposition (DED)
Research Subject
the state of the art, material and as-built microstructures, robotic build platforms, model decomposition and slicing, deposition trajectory planning, monitoring and control, and post-processing challenges affecting geometrical and performance specifications
Publication Details
Publication Date
2021-10-16
Journal
Publisher
ISSN
Cited by
121
Access Type
Author Information
Download PDF
Subscribe to digest
References available in scid.ai3
Review of in-situ process monitoring and in-situ metrology for metal additive manufacturing2016
A Review on Process Monitoring and Control in Metal-Based Additive Manufacturing2014
Wire and arc additive manufacturing: Opportunities and challenges to control the quality and accuracy of manufactured parts2021