Fabrication and Characterization Of Poly Lactic Acid (PLA)-Starch Based Bioplastic Composites
Получение и характеристика биопластиковых композитов на основе полимолочной кислоты (PLA) и крахмала
2019-11-01
SCID: 54.1/dmdjhyed
Discuss with AI
FTIR analysisPLA-starch bioplastic compositesextrusion and compression moldingfood packagingpolylactic acid (PLA)
Figures from the paper
Abstract (AI)
Abstract In this study, to make a good bioplastic composite, starch-based bioplastic is produced by adding polylactic acid (PLA) to improve its properties. PLA was added into starch-based bioplastic with various concentrations of 0, 3, and 10 wt.%. The extrusion was performed at 90-150 °C and compression moulding process was conducted at 150 °C and pressured at 50 kgf/cm2. Bioplastic composites have been characterized to know its properties. FTIR analysis indicated shifting and increasing spectra of interaction between PLA and starch-based bioplastic. Contact angle and solubility analysis revealed that adding PLA can increase the stability of hydrophobic characteristic and insoluble properties. The combination of PLA and starch-based bioplastic can improve the mechanical properties. In addition, thermal properties of bioplastic composites have a better thermal stability and produce a lower melting point thus the energy needed to melt for bioplastic composites becomes milt as raising PLA composition. The density of bioplastics was in the range of 1.2 - 1.3 g/cm3 that would be good for light bioplastic. The results of this study showed that the combination of starch-based bioplastics and PLA at low concentration (10wt.%) potentially could enhance the properties of bioplastic composites for food packaging.
Key Findings
1
Adding 3 and 10 wt.% PLA to starch-based bioplastic produces composites with improved mechanical properties.
2
FTIR spectra show increased and shifted interactions between PLA and the starch-based matrix.
3
Increasing PLA composition improves thermal stability while lowering the melting point and energy required for melting.
4
PLA addition enhances hydrophobic stability and insoluble behavior, according to contact-angle and solubility analyses.
5
The composites have densities of 1.2–1.3 g/cm³, and the 10 wt.% PLA formulation potentially suits food-packaging applications.
Research Object
PLA–starch-based bioplastic composites
Research Subject
The effects of PLA concentration on the chemical interactions, hydrophobicity, solubility, mechanical properties, thermal stability, melting behavior, and density of starch-based bioplastic composites
Publication Details
Publication Date
2019-11-01
Journal
Publisher
ISSN
Open access PDF
Access Type
Author Information
Download PDF
Subscribe to digest