Toward sustainable membrane recycling via controlled oxidation: Smart strategies for effluent treatment in the pulping process
К устойчивой переработке мембран посредством контролируемого окисления: интеллектуальные стратегии очистки сточных вод в процессе целлюлозно-бумажного производства
2026-02-20
SCID: 54.1/drv6u437
Discuss with AI
controlled oxidationend-of-life reverse osmosis membranesmembrane recyclingnanofiltration/ultrafiltration membranespulp mill effluent treatment
Figures from the paper
Abstract (AI)
The pulping industry consumes billions of cubic meters of freshwater annually, and generates substantial volumes of highly contaminated wastewater creating a large pressure on freshwater resources and treatment infrastructure. Simultaneously, over two million end-of-life (EoL) reverse osmosis (RO) modules are expected to be discarded annually by 2025. This study investigated technical feasibility of recycling EoL RO membranes through controlled chemical degradation of the polyamide (PA) selective layer for treatment of alkaline filtrate effluent from pulp mill. Controlled oxidation using sodium hypochlorite (NaOCl) with calcium chloride (CaCl 2 ) catalysis reduced treatment time by ∼ 50% and markedly accelerated PA degradation compared to NaOCl alone. Characterization via Fourier transform infrared spectroscopy, scanning electron microscopy, and permeance analysis confirmed progressive PA removal and the functional transformation into nanofiltration (NF)- or ultrafiltration (UF)-like configurations. Recycled membranes exhibited pure water permeances from 4.3 to 223 L m − 2 h − 1 bar −1 and molecular weight cut-off (MWCO) values of 580–10,300 Da. Oxidized EoL membranes outperformed commercial UF membranes (1–10 kDa range), achieving higher permeance while maintaining comparable MWCO. Applied to alkaline pulp mill effluent, the most effective low-to-moderately oxidized membrane (permeance ∼ 20 LMHb, MWCO ∼ 640 Da) removed ∼ 4×more chemical oxygen demand, ∼ 1.4×more total dissolved carbon, and ∼ 8.3×more conductivity than the commercial UF membrane UH004 P. Superior performance resulted from higher flux due to increased surface hydrophilicity and wettability from oxidation. Results indicate that controlled oxidation successfully transforms waste membranes into high-performance (NF/UF-like) application-specific membranes. This innovative approach delivers significant environmental and economic advantages while providing a practical pathway for integrating circular economy principles into membrane technology and industrial wastewater treatment.
Key Findings
1
Controlled oxidation of end-of-life reverse osmosis membranes with sodium hypochlorite and calcium chloride catalysis reduced treatment time by approximately 50% versus sodium hypochlorite alone.
2
For alkaline pulp-mill effluent, the best low-to-moderately oxidized membrane removed approximately four times more chemical oxygen demand, 1.4 times more total dissolved carbon, and 8.3 times more conductivity than commercial UF membrane UH004 P.
3
Oxidation increased surface hydrophilicity and wettability, producing higher flux and enabling application-specific recycling of waste RO membranes.
4
Oxidation progressively removed the polyamide layer and transformed discarded RO membranes into nanofiltration- or ultrafiltration-like configurations.
5
Oxidized end-of-life membranes outperformed commercial ultrafiltration membranes by combining higher permeance with comparable molecular-weight cutoff values.
6
Recycled membranes achieved pure-water permeances of 4.3–223 L m−2 h−1 bar−1 and molecular-weight cutoffs of 580–10,300 Da.
Research Object
end-of-life reverse osmosis membranes recycled for treatment of alkaline pulp-mill effluent
Research Subject
the effects of controlled NaOCl/CaCl2 oxidation on polyamide-layer degradation, membrane transformation, permeance, molecular weight cut-off, and effluent-removal performance
Publication Details
Publication Date
2026-02-20
Journal
Publisher
ISSN
Open access PDF
Access Type
Author Information
Download PDF
Subscribe to digest