Binderless Hardwood Tree Bark-Based Insulation Panels for Green Building Applications
Бесклеевые теплоизоляционные панели на основе коры лиственных деревьев для применения в экологичном строительстве
2026-04-30
SCID: 54.1/ef2x6dxt
Discuss with AI
binderless insulation panelscompressive strengthhardwood barkhygroscopicitythermal conductivity
Figures from the paper
Abstract (AI)
Tree bark, an abundant by-product of the timber industry, represents a promising feedstock for sustainable construction. This study investigates the thickness swelling, water absorption, hygroscopicity and mechanical (compressive strength) properties of insulation panels produced from hardwood bark (Tilia spp. and Robinia pseudoacacia) via hydromechanical treatment and a wet-forming process. The panels were produced without added adhesives, relying on the formation of hydrogen bonds during the drying phase to ensure structural integrity. Both bark-based insulation boards (thermal conductivity coefficient 0.055–0.057 W/m·K) showed similar hygroscopic behavior, reaching equilibrium moisture contents of max. 25% at 93.9% RH. Water absorption after 24 h immersion was highly material-dependent; Tilia-based panels showed 57.11 ± 5.81%, and Robinia-based panels 320.61 ± 11.34%. Thickness swelling remained low (max. 6% for Robinia), showing significant orthotropic anisotropy. At 10% compressive strain, the Tilia and Robinia bark-based panels showed compressive strengths of 188 ± 14.6 kPa and 298 ± 18.1 kPa, accordingly. These findings demonstrate that hardwood bark can be successfully valorized into high-performance, binderless insulation, supporting circular economic strategies.
Key Findings
1
Both bark-based panels exhibited low thermal conductivity of 0.055–0.057 W/m·K and reached equilibrium moisture contents of up to 25% at 93.9% relative humidity.
2
Hardwood bark from Tilia spp. and Robinia pseudoacacia was converted into binderless insulation panels using hydromechanical treatment and wet forming.
3
Panel structural integrity was achieved without added adhesives through hydrogen-bond formation during drying.
4
The results support hardwood bark valorization as a binderless insulation material for sustainable and circular building applications.
5
Thickness swelling remained low, reaching a maximum of 6% for Robinia panels, while compressive strength at 10% strain was 188 ± 14.6 kPa for Tilia and 298 ± 18.1 kPa for Robinia.
6
Water absorption was strongly material-dependent: 57.11 ± 5.81% for Tilia panels versus 320.61 ± 11.34% for Robinia panels after 24 hours of immersion.
Research Object
binderless insulation panels produced from Tilia spp. and Robinia pseudoacacia hardwood bark
Research Subject
hygroscopic, water-absorption, thickness-swelling, thermal-conductivity, and compressive-strength properties of the bark-based panels
Publication Details
Publication Date
2026-04-30
Journal
Publisher
ISSN
Cited by
1
Open access PDF
Access Type
Author Information
Download PDF
Subscribe to digest