Fault activation and induced seismicity in geological carbon storage – Lessons learned from recent modeling studies

Активизация разломов и индуцированная сейсмичность при геологическом хранении углерода: уроки, извлечённые из последних результатов моделирования
Antonio Pio Rinaldi, Jonny Rutqvist, Yves Guglielmi, Víctor Vilarrasa, Pierre Jeanne, Alberto Mazzoldi, Luca Urpi
2016-09-20

CO2 injectioncaprock leakagefault activationgeological carbon storageinduced seismicity
In the light of current concerns related to induced seismicity associated with geological carbon sequestration (GCS), this paper summarizes lessons learned from recent modeling studies on fault activation, induced seismicity, and potential for leakage associated with deep underground carbon dioxide (CO2) injection. Model simulations demonstrate that seismic events large enough to be felt by humans require brittle fault properties and continuous fault permeability allowing pressure to be distributed over a large fault patch to be ruptured at once. Heterogeneous fault properties, which are commonly encountered in faults intersecting multilayered shale/sandstone sequences, effectively reduce the likelihood of inducing felt seismicity and also effectively impede upward CO2 leakage. A number of simulations show that even a sizable seismic event that could be felt may not be capable of opening a new flow path across the entire thickness of an overlying caprock and it is very unlikely to cross a system of multiple overlying caprock units. Site-specific model simulations of the In Salah CO2 storage demonstration site showed that deep fractured zone responses and associated microseismicity occurred in the brittle fractured sandstone reservoir, but at a very substantial reservoir overpressure close to the magnitude of the least principal stress. We conclude by emphasizing the importance of site investigation to characterize rock properties and if at all possible to avoid brittle rock such as proximity of crystalline basement or sites in hard and brittle sedimentary sequences that are more prone to injection-induced seismicity and permanent damage.
1
Even sizable felt seismic events may not create flow paths through an entire caprock, and are very unlikely to cross multiple caprock units.
2
Felt-magnitude seismic events require brittle fault properties and continuous permeability that distributes pressure across a large fault patch.
3
Heterogeneous fault properties in multilayer shale–sandstone sequences reduce the likelihood of felt seismicity and impede upward CO2 leakage.
4
In Salah simulations showed deep fractured-zone responses and microseismicity in brittle sandstone only at reservoir overpressures approaching the least principal stress.
5
Site investigation should characterize rock properties and avoid brittle formations, crystalline-basement proximity, and hard sedimentary sequences prone to induced seismicity and permanent damage.

Deep underground CO2 injection in geological carbon storage systems, including faults, reservoirs, and overlying caprock units

Fault activation, induced seismicity, and CO2 leakage potential under injection-induced pressure and rock-property conditions

Publication Details
Publication Date
2016-09-20
Journal
Publisher
ISSN
Cited by
259
Access Type
Author Information
Authors
Antonio Pio Rinaldi
Jonny Rutqvist
Yves Guglielmi
Víctor Vilarrasa
Pierre Jeanne
Alberto Mazzoldi
Luca Urpi
Explore further
Open the scid.ai AI chat with a ready-made request: it will find papers on a similar topic and help build a literature review.
Find similar papers in the chat →
Make a presentation
100%