Migration and performance of erucamide slip additive in high‐density polyethylene bottle caps

Миграция и эксплуатационные характеристики скользящей добавки эрукамида в крышках из полиэтилена высокой плотности
Nabeen Dulal, Robert A. Shanks, David Chalmers, Benu Adhikari, Harsharn S. Gill
2018-08-23

application torqueerucamide slip additivehigh-density polyethylenescrew capssurface migration
ABSTRACT Diffusion of erucamide and their morphology on surface characteristics of high‐density polyethylene (HDPE) screw caps depend on storage conditions. Erucamide performance relies on its amount, distribution, and consistency on the surface of HDPE. Specific application and removal torques can be achieved by controlling the amount of erucamide on the surface. The surface amount and the torque increased to an optimum level at 38 and 50 °C within 120 hours of incubation, while they remained unchanged for lower temperatures. Erucamide diffused to the surface and formed flat plate‐like crystal structures at similar time and temperature. These flat‐plates can slide over each other and provide the slip required to decrease the torque. An increase in contact angle demonstrated that hydrophobic hydrocarbon‐chains of amide slip additives were oriented toward the air interface. An optimum surface amount of erucamide for proper sealing torque could be produced at a different combination of storage time and temperature. © 2018 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2018, 135, 46822.
1
Erucamide formed flat, plate-like crystals on the HDPE surface; sliding between plates provided the slip that reduced torque.
2
Erucamide migration and surface morphology in HDPE screw caps depend strongly on storage time and temperature.
3
Increasing contact angle indicated that hydrophobic hydrocarbon chains of erucamide oriented toward the air interface.
4
Proper sealing torque can be achieved by selecting different combinations of storage temperature and time to produce an optimum surface erucamide amount.
5
Surface erucamide amount and torque increased to an optimum at 38 and 50 °C within 120 hours, but remained unchanged at lower temperatures.

Erucamide slip additive migrating and crystallizing on high-density polyethylene (HDPE) bottle-cap surfaces during storage

The effects of storage time and temperature on erucamide surface migration, morphology, hydrophobic-chain orientation, and resulting sealing and application/removal torque performance

Publication Details
Publication Date
2018-08-23
Journal
Publisher
ISSN
Access Type
Author Information
Authors
Nabeen Dulal
Robert A. Shanks
David Chalmers
Benu Adhikari
Harsharn S. Gill
Explore further
Open the scid.ai AI chat with a ready-made request: it will find papers on a similar topic and help build a literature review.
Find similar papers in the chat →
Make a presentation
100%