Advances in Corrosion-Resistant Thermal Spray Coatings for Renewable Energy Power Plants. Part I: Effect of Composition and Microstructure
Достижения в области коррозионно-стойких покрытий, нанесённых методом термического напыления, для энергетических установок на возобновляемых источниках энергии. Часть I: Влияние состава и микроструктуры
2019-11-07
SCID: 54.1/ewzyah84
Discuss with AI
alloy compositioncoating microstructurehigh-temperature corrosionrenewable energy power plantsthermal spray coatings
Figures from the paper
Abstract (AI)
Abstract Power generation from renewable resources has attracted increasing attention in recent years owing to the global implementation of clean energy policies. However, such power plants suffer from severe high-temperature corrosion of critical components such as water walls and superheater tubes. The corrosion is mainly triggered by aggressive gases like HCl, H2O, etc., often in combination with alkali and metal chlorides that are produced during fuel combustion. Employment of a dense defect-free adherent coating through thermal spray techniques is a promising approach to improving the performances of components as well as their lifetimes and, thus, significantly increasing the thermal/electrical efficiency of power plants. Notwithstanding the already widespread deployment of thermal spray coatings, a few intrinsic limitations, including the presence of pores and relatively weak intersplat bonding that lead to increased corrosion susceptibility, have restricted the benefits that can be derived from these coatings. Nonetheless, the field of thermal spraying has been continuously evolving, and concomitant advances have led to progressive improvements in coating quality; hence, a periodic critical assessment of our understanding of the efficacy of coatings in mitigating corrosion damage can be highly educative. The present paper seeks to comprehensively document the current state of the art, elaborating on the recent progress in thermal spray coatings for high-temperature corrosion applications, including the alloying effects, and the role of microstructural characteristics for understanding the behavior of corrosion-resistant coatings. In particular, this review comprises a substantive discussion on high-temperature corrosion mechanisms, novel coating compositions, and a succinct comparison of the corrosion-resistant coatings produced by diverse thermal spray techniques.
Key Findings
1
Corrosion resistance depends strongly on coating alloy composition and microstructural characteristics, with performance varying across thermal-spray techniques.
2
Dense, defect-free, adherent thermal-spray coatings can improve component performance and lifetime, potentially increasing plant thermal and electrical efficiency.
3
Pores and weak intersplat bonding are intrinsic thermal-spray limitations that increase coating susceptibility to high-temperature corrosion.
4
Recent advances in thermal spraying have progressively improved coating quality and corrosion-mitigation potential.
5
Renewable-energy power plants experience severe high-temperature corrosion of water walls and superheater tubes from HCl, H2O, and alkali or metal chlorides.
Research Object
Corrosion-resistant thermal spray coatings applied to critical components of renewable energy power plants, particularly water walls and superheater tubes
Research Subject
The effects of coating composition and microstructural characteristics on high-temperature corrosion resistance and corrosion behavior
Publication Details
Publication Date
2019-11-07
Journal
Publisher
ISSN
Open access PDF
Access Type
Author Information
Download PDF
Subscribe to digest