Numerical Study of the Effects of Lean Zones on SAGD Performance in Periodically Heterogeneous Media

Численное исследование влияния бедных зон на эффективность SAGD в периодически гетерогенных средах
Zhangxin Chen, Jinze Xu, Jili Cao, Ran Li
2014-06-03

SAGD performancelean zonesnet present valueperiodically heterogeneous mediasteam-assisted gravity drainage
Abstract Highly permeable lean zones that halt the growth of steam chambers through lateral spreading significantly affect the performance of steam-assisted gravity drainage (SAGD). Nexen's Long Lake and Suncor's Firebag SAGD projects reported existence of intersecting lean zones that behave as thief zones, causing the operating pressure to be lower than the desirable value to reduce heat loss in the lean zones. Given a high steam-oil ratio, long and continuous lean zones located vertically above or near a wellbore pose a challenge. Log analyses and core experiments reveal that the distribution of lean zones is close to being periodic in the upper and middle parts of the McMurray Formation in Athabasca. A simulation model with periodic lean zones is established to analyze the effects of these lean zones on SAGD performance. We investigate the effects of vertical distribution, horizontal spacing and sizes, and spatial relationship with SAGD horizontal wells. We classify the locations of lean zones as above an injector (AI), between an injector and a producer (BIP), and below a producer (BP). For each location, we assign different spacing for neighboring lean zones of different sizes. A lean zone must reach a critical size before this area can act as a thief zone, which is most significant in AI and BIP situations. In general, BP cases are hardly influenced by lean zones. We further control the vertical distribution of these zones using a triangular periodic function that depends on layer depth and connate water saturation. Changing the period of the dominant function yields different kinds of lean zone distribution patterns; we run simulations for each pattern. Results show that lean zones with small periods have significant effects on SAGD performance. We vary the injection pressure to obtain the highest net present value (NPV) based on the fact that more steam is released through the lean zones at a higher pressure.
1
Cases with lean zones below a producer (BP) are minimally influenced by lean zones and show little SAGD performance degradation.
2
Highly permeable lean zones that promote lateral steam spreading can halt steam chamber growth and significantly degrade SAGD performance.
3
Intersecting long, continuous lean zones located vertically above or near wellbores act as thief zones, lowering operating pressure and increasing steam loss.
4
Lean zone spatial patterns matter: small-period periodic distributions produce more significant negative effects on SAGD performance, and optimal injection pressure (maximizing NPV) increases because higher pressure releases more steam through lean zones.
5
Lean zones must reach a critical size before acting as thief zones; this effect is most significant when the lean zone is above an injector (AI) or between injector and producer (BIP).

Steam-assisted gravity drainage (SAGD) reservoir system with periodically distributed lean zones in the McMurray Formation

Effects of vertically and horizontally periodic lean-zone distribution (location, spacing, size, and spatial relation to horizontal wells) and injection pressure on SAGD performance metrics including steam chamber growth, steam-oil ratio, heat loss, operating pressure, and net present value

Publication Details
Publication Date
2014-06-03
Journal
Publisher
ISSN
Access Type
Author Information
Authors
Zhangxin Chen
Jinze Xu
Jili Cao
Ran Li
Explore further
Open the scid.ai AI chat with a ready-made request: it will find papers on a similar topic and help build a literature review.
Find similar papers in the chat
Make a presentation
100%