Tailoring Hollow Silica Spheres for Enhanced Hydrogen Adsorption Performance: Role of Synthesis Parameters
Оптимизация характеристик полых сфер из диоксида кремния для повышения эффективности адсорбции водорода: роль параметров синтеза
2025-06-25
SCID: 54.1/fcsyztwk
Discuss with AI
cetyltrimethylammonium bromide (CTAB)hollow silica sphereshydrogen adsorptionpore-filling mechanismsol–gel/emulsion method
Figures from the paper
Abstract (AI)
Herein, hollow silica spheres (HSS) are prepared using a sol–gel/emulsion (oil‐in‐water/ethanol) method where cetyltrimethylammonium bromide (CTAB) is used as a surfactant to stabilize the hydrolysis of tetraethoxysilane (TEOS) oil droplets. The adsorbents are characterized using various physicochemical characterization techniques. It is found that the hollow sphere diameters range from 250 to 400 nm, depending on the ethanol‐to‐water ratio ( E / W ), while shell thickness is tuned by CTAB concentration. The Brunauer–Emmett–Teller surface areas ranged from 816 to 1045 m 2 g −1 , with pore sizes around 3.1 nm according to the Barrett–Joyner–Halenda. Although silica materials show promise for hydrogen storage, their low adsorption capacity limits practical applications. Tailoring synthesis parameters, such as the ethanol‐to‐water ratio and CTAB concentrations, results in HSS with enhanced pore structures and surface areas, leading to improved hydrogen adsorption. The best hydrogen adsorption of 1.59 wt% is attained at an E / W ratio of 0.4 and a CTAB concentration of 5.3 m m . Post‐adsorption analysis revealed a pore‐filling mechanism with no structural degradation, confirming the material's stability and reversible hydrogen confinement. These results demonstrate that precise control of synthesis parameters can improve the hydrogen storage capacity of HSS materials, offering a promising strategy for efficient hydrogen adsorbents.
Key Findings
1
A sol–gel/emulsion method produced hollow silica spheres with diameters of 250–400 nm, controlled by the ethanol-to-water ratio.
2
CTAB concentration tuned the shell thickness, while synthesis optimization generated surface areas of 816–1045 m² g⁻¹ and pores around 3.1 nm.
3
Optimized pore structures and surface areas improved hydrogen adsorption compared with unoptimized silica materials.
4
Post-adsorption analysis indicated pore filling without structural degradation, demonstrating stable and reversible hydrogen confinement.
5
The highest hydrogen adsorption, 1.59 wt%, was achieved at an ethanol-to-water ratio of 0.4 and CTAB concentration of 5.3 mM.
Research Object
hollow silica spheres (HSS) used as hydrogen adsorbents
Research Subject
the effects of ethanol-to-water ratio and CTAB concentration on HSS morphology, pore structure, surface area, hydrogen adsorption capacity, and adsorption reversibility
Publication Details
Publication Date
2025-06-25
Journal
Publisher
ISSN
Access Type
Author Information
Download PDF
Subscribe to digest