Additive manufacturing of strong silica sand structures enabled by polyethyleneimine binder

Аддитивное производство прочных конструкций из кварцевого песка с использованием полиэтилениминового связующего
Michelle L. Lehmann, Dustin Gilmer, Lu Han, Derek Siddel, Amy Elliott, Tomonori Saito, Guang Hua Yang, Azhad U. Chowdhury, Benjamin Doughty
2021-08-26

Binder jet additive manufacturingEthyl cyanoacrylate infiltrationFlexural strengthPolyethyleneimine binderSilica sand
Binder Jet Additive Manufacturing (BJAM) is a versatile AM technique that can form parts from a variety of powdered materials including metals, ceramics, and polymers. BJAM utilizes inkjet printing to selectively bind these powder particles together to form complex geometries. Adoption of BJAM has been limited due to its inability to form strong green parts using conventional binders. We report the discovery of a versatile polyethyleneimine (PEI) binder for silica sand that doubled the flexural strength of parts to 6.28 MPa compared with that of the conventional binder, making it stronger than unreinforced concrete (~4.5 MPa) in flexural loading. Furthermore, we demonstrate that PEI in the printed parts can be reacted with ethyl cyanoacrylate through a secondary infiltration, resulting in an increase in flexural strength to 52.7 MPa. The strong printed parts coupled with the ability for sacrificial washout presents potential to revolutionize AM in various applications including construction and tooling.
1
A polyethyleneimine (PEI) binder was identified for silica sand in Binder Jet Additive Manufacturing (BJAM).
2
PEI doubled the flexural strength of printed green parts to 6.28 MPa compared with a conventional binder.
3
PEI-bound silica sand parts exceeded the flexural strength of unreinforced concrete, approximately 4.5 MPa.
4
Secondary infiltration with ethyl cyanoacrylate increased the flexural strength of PEI-printed parts to 52.7 MPa.
5
The combination of high strength and sacrificial washout enables potential applications in construction and tooling.

silica sand structures fabricated by Binder Jet Additive Manufacturing using polyethyleneimine binder

flexural-strength enhancement of the printed structures through polyethyleneimine binding and secondary ethyl cyanoacrylate infiltration

Publication Details
Publication Date
2021-08-26
Journal
Publisher
ISSN
Cited by
53
Access Type
Author Information
Authors
Michelle L. Lehmann
Dustin Gilmer
Lu Han
Derek Siddel
Amy Elliott
Tomonori Saito
Guang Hua Yang
Azhad U. Chowdhury
Benjamin Doughty
Explore further
Open the scid.ai AI chat with a ready-made request: it will find papers on a similar topic and help build a literature review.
Find similar papers in the chat →
Make a presentation
100%