Highly conductive, printable pastes from capillary suspensions

Высокопроводящие печатные пасты на основе капиллярных суспензий
M. Alexander Schneider, Norbert Willenbacher, Erin Koos
2016-08-10

capillary suspensionsconductive pastesfront-side metallizationprinted electronicsshear thinning
We have used the capillary suspension phenomenon to design conductive pastes for printed electronic applications, such as front side metallization of solar cells, without non-volatile, organic additives that often deteriorate electrical properties. Adding a small amount of a second, immiscible fluid to a suspension creates a network of liquid bridges between the particles. This capillary force-controlled microstructure allows for tuning the flow behavior in a wide range. Yield stress and low-shear viscosity can be adjusted such that long-term stability is provided by inhibiting sedimentation, and, even more importantly, narrow line widths and high aspect ratios are accessible. These ternary mixtures, called capillary suspensions, exhibit a strong degree of shear thinning that allows for conventional coating or printing equipment to be used. Finally, the secondary fluid, beneficial for stability and processing of the wet paste, completely evaporates during drying and sintering. Thus, we obtained high purity silver and nickel layers with a conductivity two times greater than could be obtained with state-of-the-art, commercial materials. This revolutionary concept can be easily applied to other systems using inorganic or even organic conductive particles and represents a fundamental paradigm change to the formulation of pastes for printed electronics.
1
A small amount of immiscible secondary fluid forms liquid bridges between particles, creating a tunable network that controls yield stress, viscosity, and flow behavior.
2
Capillary suspensions enable conductive printable pastes without non-volatile organic additives that can impair electrical performance.
3
Silver and nickel layers made from these pastes achieved conductivity twice that of state-of-the-art commercial materials, with the approach applicable to inorganic and organic conductive particles.
4
The resulting pastes resist sedimentation, support narrow printed lines and high aspect ratios, and exhibit strong shear thinning compatible with conventional coating and printing equipment.
5
The secondary fluid evaporates completely during drying and sintering, producing high-purity silver and nickel layers.

conductive capillary-suspension pastes for printed electronics, including silver and nickel particle formulations

the tunable flow behavior, stability, printability, drying, and electrical conductivity of the pastes

Publication Details
Publication Date
2016-08-10
Journal
Publisher
ISSN
Cited by
57
Access Type
Author Information
Authors
M. Alexander Schneider
Norbert Willenbacher
Erin Koos
Explore further
Open the scid.ai AI chat with a ready-made request: it will find papers on a similar topic and help build a literature review.
Find similar papers in the chat →
Make a presentation
100%