Optimizing film mechanical and water contact angle properties via PLA/starch/lecithin concentrations

Оптимизация механических свойств пленок и краевого угла смачивания водой путем варьирования концентраций ПЛА, крахмала и лецитина
Taofeek Mukaila, Adewale Adeniyi, Ibrahim Adebayo Bello, Niloy Chandra Sarker, Ewumbua Monono, Ademola Monsur Hammed
2024-07-22

PLA/starch/lecithin filmsResponse surface methodologyTensile strengthWater contact angleYoung's modulus
The optimization of mechanical property and water contact angle of PLA/starch/lecithin film was conducted using response surface methodology. The tensile strength, Young's modulus and water contact angle of PLA/starch/lecithin film ranged from 0.44 ± 0.21–7.18 ± 0.57 MPa, 133.78 ± 33.7–775.57 ± 85.44 MPa and 17.71 ± 1.93–59.41 ± 28 (o), respectively. The amount of PLA and starch significantly impacts tensile strength and Young's modulus. Unlike starch, increasing PLA in the film formulation increases tensile strength and Young's modulus. The PLA-lecithin interaction decreases the film tensile strength and Young's modulus. The film water contact angle is statistically impacted by the PLA/starch interaction and quadratic term of lecithin. The adjusted R-square and p-value of each of the response ANOVA result indicates that the model quite captures the behavior of the responses. The response 2D plots also provide more insight into the variable behavior on the resulting response, making the response surface methodology a tool to design, develop and optimize PLA-based films.
1
Film tensile strength, Young’s modulus, and water contact angle ranged from 0.44–7.18 MPa, 133.78–775.57 MPa, and 17.71–59.41°, respectively.
2
Interactions between PLA and lecithin decreased film tensile strength and Young’s modulus.
3
PLA and starch concentrations significantly affected tensile strength and Young’s modulus; increasing PLA improved both properties, unlike increasing starch.
4
Response surface methodology was used to design and optimize PLA/starch/lecithin films for mechanical properties and water contact angle.
5
Water contact angle was significantly influenced by the PLA–starch interaction and the quadratic effect of lecithin; ANOVA indicated adequate model fit.

PLA/starch/lecithin films

The effects of PLA, starch, and lecithin concentrations and their interactions on the films’ tensile strength, Young’s modulus, and water contact angle

Publication Details
Publication Date
2024-07-22
Journal
Publisher
ISSN
Access Type
Author Information
Authors
Taofeek Mukaila
Adewale Adeniyi
Ibrahim Adebayo Bello
Niloy Chandra Sarker
Ewumbua Monono
Ademola Monsur Hammed
Explore further
Open the scid.ai AI chat with a ready-made request: it will find papers on a similar topic and help build a literature review.
Find similar papers in the chat →
Make a presentation
100%