Migration of Erucamide in Polyethylene Film

Миграция эрукамида в полиэтиленовой пленке
Mauro Luciano Baesso, Edvani Curti Muniz, Alessandro Francisco Martins, Luís Carlos Malacarne, Raquel Palacios, Elisângela Corradini, Kelly Cristina Maziero, Monique de Souza, Raquel da Silva Palácios
2026-08-26

Coefficient of frictionErucamide migrationPolyethylene filmSealing temperatureSlip agent
ABSTRACT Erucamide is a migratory slip agent widely used in polyethylene (PE) films for flexible packaging applications, particularly those processed on high‐speed filling and packaging lines, where control of the coefficient of friction (COF) is critical; however, its uncontrolled migration can adversely affect surface and processing properties. In this study, the migration behavior of erucamide in a three‐layer low‐density polyethylene (LDPE) film was investigated as a function of aging time and storage temperature, and its impact on COF and sealing behavior were evaluated. The film was characterized by differential scanning calorimetry (DSC), x‐ray diffraction (XRD), and thermogravimetric analysis (TGA), confirming its LDPE composition. The erucamide concentration on prepared film was determined as 3500 ± 370 ppm by high‐performance liquid chromatography (HPLC). Crystallinity values obtained from DSC and XRD showed good agreement and were correlated with additive migration. Surface morphology, topographical changes, and slip‐agent distribution were analyzed by scanning electron microscopy (SEM) and atomic force microscopy (AFM), while surface energy changes were assessed by contact angle measurements. Fourier transform infrared photoacoustic spectroscopy (FTIR‐PAS) confirmed the presence of erucamide near the film surface. A rapid decrease in COF with increasing temperature was observed. So, COF values after 72 h at room temperature were similar to the ones obtained at 50°C on just warmed films; however, excessive surface crystallization was observed at elevated temperature, leading to an increase in the initial sealing temperature. The combined analytical approaches proved effective in elucidating erucamide migration and its influence on film performance.
1
Crystallinity measurements from DSC and XRD agreed well and correlated with erucamide migration behavior.
2
Elevated-temperature storage caused excessive surface crystallization and increased the initial sealing temperature, potentially impairing sealing performance.
3
Erucamide migration in three-layer LDPE film was investigated as a function of aging time and storage temperature, with effects on friction and sealing performance.
4
Increasing temperature rapidly decreased the coefficient of friction; 72 hours at room temperature produced values similar to briefly warmed films at 50°C.
5
The prepared film contained 3500 ± 370 ppm erucamide, quantified by high-performance liquid chromatography.

Erucamide in a three-layer low-density polyethylene (LDPE) film for flexible packaging

Erucamide migration as a function of aging time and storage temperature, and its effects on coefficient of friction (COF) and sealing behavior

Publication Details
Publication Date
2026-08-26
Journal
Publisher
ISSN
Cited by
0
Access Type
Author Information
Authors
Mauro Luciano Baesso
Edvani Curti Muniz
Alessandro Francisco Martins
Luís Carlos Malacarne
Raquel Palacios
Elisângela Corradini
Kelly Cristina Maziero
Monique de Souza
Raquel da Silva Palácios
Explore further
Open the scid.ai AI chat with a ready-made request: it will find papers on a similar topic and help build a literature review.
Find similar papers in the chat →
Make a presentation
100%