Additive Manufacturing Constraints in Topology Optimization for Improved Manufacturability
Ограничения аддитивного производства в топологической оптимизации для повышения технологичности
2018-02-02
SCID: 54.1/jd2jzu4s
Discuss with AI
additive manufacturingmanufacturing constraintspowder bed fusionsupport structure volumetopology optimization
Figures from the paper
Abstract (AI)
Additive manufacturing (AM) provides tremendous advantage over conventional manufacturing processes in terms of creative freedom, and topology optimization (TO) can be deemed as a potential design approach to exploit this creative freedom. To integrate these technologies and to create topology optimized designs that can be easily manufactured using AM, manufacturing constraints need to be introduced within the TO process. In this research, two different approaches are proposed to integrate the constraints within the algorithm of density-based TO. Two AM constraints are developed to demonstrate these two approaches. These constraints address the minimization of number of thin features as well as minimization of volume of support structures in the optimized parts, which have been previously identified as potential concerns associated with AM processes such as powder bed fusion AM. Both the manufacturing constraints are validated with two case studies each, along with experimental validation. Another case study is presented, which shows the combined effect of the two constraints on the topology optimized part. Two metrics of manufacturability are also presented, which have been used to compare the design outputs of conventional and constrained TO.
Key Findings
1
A second constraint minimizes the volume of required support structures, reducing another important additive-manufacturing limitation.
2
Both constraints were validated through two case studies each and experimental testing, while an additional case study demonstrated their combined effect.
3
One developed constraint minimizes thin features in optimized designs, addressing a manufacturability concern in powder bed fusion additive manufacturing.
4
The study integrates additive-manufacturing constraints directly into density-based topology optimization using two distinct algorithmic approaches.
5
Two manufacturability metrics were introduced to compare conventional topology-optimization designs with designs generated using manufacturing constraints.
Research Object
density-based topology-optimized parts for powder bed fusion additive manufacturing
Research Subject
manufacturability improvement through constraints minimizing thin features and support-structure volume
Publication Details
Publication Date
2018-02-02
Journal
Publisher
ISSN
Cited by
59
Access Type
Author Information
Download PDF
Subscribe to digest