A New Approach to the Modeling of Hydraulic-Fracturing Treatments in Naturally Fractured Reservoirs

Новый подход к моделированию гидроразрыва пласта в естественнотрещиноватых коллекторах
Dongxiao Zhang, Xiang Li, Sanbai Li
2017-03-06

complex-fracture-network propagationcoupled THM modelhydraulic fracturingmixed finite-volume/finite-element methodnaturally fractured reservoirs
Summary A fully coupled thermal/hydromechanical (THM) model for hydraulic-fracturing treatments is developed in this study. In this model, the mixed finite-volume/finite-element method is used to solve the coupled system, in which the multipoint flux approximation L-method is used to calculate interelement fluid and heat flux. The Gu et al. (2011) crossing criterion is extended to a 3D scenario to delineate the crossing behaviors as hydraulic fractures meet inclined natural fractures. Moreover, the modified Barton et al. (1985) model proposed by Asadollahi et al. (2010) is used to estimate the fracture aperture and model the shear-dilation effect. After being (partially) verified by means of comparison with results from the literature, the developed model is used to investigate complex-fracture-network propagation in naturally fractured reservoirs. Numerical experiments show that the key factors controlling the complexity of the induced-fracture networks include stress anisotropy, injection rate, natural-fracture distribution (fracture-dip angle, strike angle, spacing, density, and length), fracture-filling properties (the degree of cementation and permeability), fracture-surface properties (cohesion and friction angle), and tensile strength of intact rock. It is found that the smaller the stress anisotropy and/or the lower the injection rate, the more complex the fracture network; a high rock tensile strength could increase the possibility of the occurrence of shear fractures; and under conditions of large permeability of fracture filling combined with small cohesive strength and friction coefficient, shear slip could become the dominant mechanism for generating complex-fracture networks. The model developed and the results presented can be used to understand the propagation of complex-fracture networks and aid in the design and optimization of hydraulic-fracturing treatments.
1
A fully coupled thermal-hydromechanical model combines mixed finite-volume/finite-element discretization with multipoint flux approximation for fluid and heat transport.
2
A modified Barton model incorporates fracture aperture evolution and shear-dilation effects in naturally fractured reservoir simulations.
3
Fracture-network complexity increases with lower stress anisotropy or injection rate and depends strongly on natural-fracture geometry and mechanical properties.
4
High intact-rock tensile strength promotes shear-fracture occurrence, while permeable, weakly cohesive, low-friction fracture fillings favor shear slip as the dominant mechanism.
5
The Gu et al. crossing criterion was extended to three dimensions to predict hydraulic-fracture interactions with inclined natural fractures.

Hydraulic-fracturing treatments and the resulting complex fracture-network propagation in naturally fractured reservoirs

The effects of stress, injection, natural-fracture, fracture-filling, fracture-surface, and intact-rock properties on complex-fracture-network propagation and the associated tensile and shear mechanisms

Publication Details
Publication Date
2017-03-06
Journal
Publisher
ISSN
Access Type
Author Information
Authors
Dongxiao Zhang
Xiang Li
Sanbai Li
Explore further
Open the scid.ai AI chat with a ready-made request: it will find papers on a similar topic and help build a literature review.
Find similar papers in the chat →
Make a presentation
100%